【Package Contains】100 pack 1 inch cable tie mounts and 100pcs 6 inch nylon zip ties.
【Quality Material】Made from 100% industrial strength 6/6 nylon, with effective flame retardant and good insulation.
【Strong Stickiness】There is strong glue on the back of mount, could support 30LB of pulling force.
【No Residue】Great manufacturing process, there will be no residue left on the surface if you want to remove the mount.
【Pre-punched Design】There's built-in screw holes for rough surfaces use or adding strength (screws not included).
Product Specifications
Item Weight: 6.4 ounces
Product Dimensions: 6.3 x 6.3 x 0.59 inches
Batteries Included?: No
Batteries Required?: No
Number of Pieces: 100
Tensile Strength: 30 Pounds
Manufacturer: ALIGADO
UPC: 191814513531
Product Information
Product description
Features:
Quality Material
100% industrial strength 6/6 nylon, with effective flame retardant and good insulation.
Strong Stickiness
There is strong glue on the back of mount, could support 30LB of pulling force.
Self Locking zip Tie
The zip ties could lock items in place securely, and the locking teeth stop the cable tie at the desired length which will be getting tighter each time you pull.
Easy to Install:
1. Just peel off the backing paper and place firmly on a clean and smooth surface.
2. Then get the zip tie through the hole.
3. Place the cable on the mount.
4. Tighten the tie and cut off the excess.
Using screws could add strength.
(screws not included)
Notice:
Please fix the mount on a clean and smooth surface.
After applying self-adhesive glue, press it for 30 seconds and wait 24 hours before use.
The glue is best to be glued once and should not be disassembled repeatedly.
If you want to remove the mounts, you can use a hair dryer to heat for about one minute, then they will fall off easily while don't damage the surface!