Rust-Oleum 7860519 Tub And Tile Refinishing 2-Part Kit, White 32 Fl Oz (Pack of 1) Rust-Oleum 7860519 Tub And Tile Refinishing 2-Part Kit, White 32 Fl Oz (Pack of 1)

Gather Supplies

Epoxy has a 6 hour use window once mixed. To ensure job completion within this window, assemble all needed supplies in advance:

- Wooden stir stick

- Goggles/glasses

- Latex gloves

- Lacquer thinner or isopropyl alcohol for clean up

- One of the following:

1. High-quality, 1/4" short nap roller

2. High-quality, fine bristle varnish brush

3. Conventional or airless sprayer

Clean

Thoroughly clean all surfaces to be coated. Any debris or residue will inhibit epoxy from adhering.

-Remove all metal drains and hardware, as well as caulking around the area.

-Remove loose paint and rust with a wire brush or sandpaper.

-Use a mold/mildew remover if necessary.

-Scrub entire surface with an abrasive cleaner and rinse completely with fresh water, ensuring all cleaner residue is removed.

Prepare Surface

To help aid adhesion of the coating, surface may need to be lightly scuffed ahead of time.

- Repair chips or cracks with patching compound.

- Prepare surface with an abrasive pad and calcium and lime remover.

- Sand surface with #400/#600 grit wet/dry sandpaper.

-Vacuum up sanding dust if needed. Rinse away any remaining residue.

-When dry, wipe surface with tack cloth to capture any remaining particulates.

Mask Off Area

Use painter's tape, masking paper and/or tarp to cover areas you do not want coated.

In case of spills or mistakes during painting, immediately use lacquer thinner or isopropyl alcohol to remove marks.