Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.
Special features:
Interior and exterior use
Weather resistant
Easy application
UV transparent
Exceptional coverage
Cost effective
Slip resistant
Fast Protection - Step by step
1. Prepare Surface
Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.
2. Apply Sealer to Dry Surface
In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.
3. Wipe Excess and Buff
After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.
Allow to Cure
Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.
Protection You Can See
Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.
Applies 511 Impregnator quickly and with minimal mess
Seals surfaces to protect from water and stain damage
Cleans stone and removes stains without damage - for everyday use
Removes dirt and grime while helping maintain surface's seal
Product Description
Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.
From the Manufacturer
511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.