Easy DIY Project:
Wiremold CMK30 Flat Screen TV Cord Cover Kit provides everything to hide the messy tangling cords and create stylish design in the home or at the work. The Wiremold white cord cover kit has a slim and sleek design and blends with any décor. Its channels can be painted to match the color of your wall.
Wiremold Cord Cover, suitable for covering wall mount TV cables, home entertainment wires, speaker cables, video cabling and home or office wiring. Organize and hide cords and cables easily, whether it has 4 HDMI cables or single cable wire the channel is big enough to fit in.
SIMPLE AND EASY INSTALLATION:
- Measure the width of the flat screen panel to determine and mark the center location of the Flat Screen TV Cord Cover.
- Using a level, mark a plumb line that extends under the flat screen panel. This line will be used to help align the base of the Flat Screen TV Cord Cover for the horizontal drop
- Measure the length for the drop from the bottom of the flat screen panel and add a minimum of 1" [25mm] for the Flat Screen TV Cord Cover to extend under the pane
- Measure and mark the length of the drop on the Flat Screen TV Cord Cover base and cover. Cut the base and cover using a hacksaw or handsaw
- Place saw cut end of base under flat screen panel and align the center grove in a base with mark on wall. Use level to plumb the base.
- Mark the top two holes, the bottom two holes and two more holes off-set closest to the center of the base.
- Using a Phillips screwdriver, push one of the anchors into the drywall until it reaches the start of the thread. Push and turn anchor into drywall until it is tight and flush to the surface.
- Insert the remaining anchors into marked holes.
- Fasten the base using #8 x 5/8” Phillips head screws (6 provided).
- Lay cables over a base in a flat pattern; do not overlap cables as this will make closing the cover difficult.
- Continue to work downward snapping the cover to the base.
- Installation complete
Easy DIY Project:
Wiremold CMK30 Flat Screen TV Cord Cover Kit provides everything to hide the messy tangling cords and create stylish design in the home or at the work. The Wiremold white cord cover kit has a slim and sleek design and blends with any décor. Its channels can be painted to match the color of your wall.
Wiremold Cord Cover, suitable for covering wall mount TV cables, home entertainment wires, speaker cables, video cabling and home or office wiring. Organize and hide cords and cables easily, whether it has 4 HDMI cables or single cable wire the channel is big enough to fit in.
SIMPLE AND EASY INSTALLATION:
- Measure the width of the flat screen panel to determine and mark the center location of the Flat Screen TV Cord Cover.
- Using a level, mark a plumb line that extends under the flat screen panel. This line will be used to help align the base of the Flat Screen TV Cord Cover for the horizontal drop
- Measure the length for the drop from the bottom of the flat screen panel and add a minimum of 1" [25mm] for the Flat Screen TV Cord Cover to extend under the pane
- Measure and mark the length of the drop on the Flat Screen TV Cord Cover base and cover. Cut the base and cover using a hacksaw or handsaw
- Place saw cut end of base under flat screen panel and align the center grove in a base with mark on wall. Use level to plumb the base.
- Mark the top two holes, the bottom two holes and two more holes off-set closest to the center of the base.
- Using a Phillips screwdriver, push one of the anchors into the drywall until it reaches the start of the thread. Push and turn anchor into drywall until it is tight and flush to the surface.
- Insert the remaining anchors into marked holes.
- Fasten the base using #8 x 5/8” Phillips head screws (6 provided).
- Lay cables over a base in a flat pattern; do not overlap cables as this will make closing the cover difficult.
- Continue to work downward snapping the cover to the base.
- Installation complete
Cord cover kit is perfect for hiding and organizing flat screen television wire and cables.
Amazon US
Contact
