Sewell Direct SW-29751-6 Silverback Banana Plugs(6 pairs/12 pieces)

What Are Banana Plugs?

Today, many electronics use the banana plug interface, also known as binding post (referring to this connection in its female form). This female binding post connection that accepts this banana plug is found commonly on virtually all audio/video receivers, speaker wall plates, and more.

Banana plugs offer an alternative to inserting a bare speaker wire into the equipment. Often a bare speaker connection is not as reliable as a guaranteed banana plug connection. Wires tend to get pulled out or frizzy after time passes. Banana plugs require only one install, giving you a permanent and robust connector at the end of your speaker wire.

What makes the Silverback banana plugs the best speaker connectors?

There are some key features of these banana plugs, which make them the installers choice. For one, 24K gold plating on the connectors allows for a lifetime of use, with a crystal clear signal. Pure copper connectors are at the core of this banana plug allow perfect signal pass-through. Silverbacks are easy to install: double screws, when properly fastened, are said to be as effective as soldering, but clearly with much less hassle. The casing unscrews over the tip, so you don’t have to worry about keeping it on the cable when installing. All these qualities make for a hassle-free solution and great signal quality.

How to Wire Silverback Banana Plugs

Unscrew the jacket to reveal the core of the Silverback Banana Plug.

Feed the bare conductor of the speaker wire into the core of the banana plug. (loosen the 2 small screws to accomodate the size of your speaker wire if needed)

Tighten the 2 screws to secure the speaker wire to the core of the Silverback Banana Plug.

Replace the jacket over the core.

Your Silverback Banana Plug is ready for connection.