Q: Why BluDento BLT-HD Lossless Bluetooth Receiver ?
A:
- We have an on-board Texas Instruments DAC PCM5102A for analog output, others do not.
- BluDento automatically enters pairing mode when it is powered on and does not require manual operation.
- Auto Reconnect: Turn on your phone's Bluetooth first, then launch BluDento.
- BluDento does not require a driver and does not require an APP, while WiFi audio receivers require a driver and require an APP.
- Works seamlessly with all your APPs and music. Spotify, Tidal, Qobuz, Pandora - all streaming APPs for instant playback.
Q: Why do I have sound problem when connecting BluDento BLT-HD by optical/coaxial output?
A: Below are some possible causes for this issue:
- The connected home theater system, audio receiver or sound bar is not set to properly decode the digital signal.
- The connected home theater system, audio receiver or sound bar DOES NOT support 96kHz/48kHz sample rate, switch the Bluetooth source device's sample rate to 48kHz/44.1kHz, this usually solves your problem.
- The optical cable is not securely connected.
- The optical cable may be faulty.
Q: How to enter pairing mode?
A: BluDento automatically enters pairing mode( the indicator light flashes blue ) when it is powered on and does not require manual operation.
Q: Is the antenna removable?
A: No, It is not removable.
Q: Can I connect this device to Amazon echo dot ?
A: Yes. make sure to connect BluDento with your stereo via an audio cable, NOT with the echo dot; enter the Alexa app, go to Settings -> Devices/Echo -> Bluetooth -> Pair a New Device -> BLT-HD.
Q: Does this item make an audible sound when it connects to a device?
A: No, it doesn't make any sound when connected/disconnected to a device. You can see it on the dislay screen when the device is successfully connected.
NOTES:
- Antenna: Can be rotated to the left, right, and up; DO NOT rotate it down; it will break if rotated down.
- BOTH model BLT-HD & B2 support LDAC codec.
- ONLY B2 has OLED display and control button.
- ONLY B1 supports NFC quick pairing, ONLY B1 has built-in antenna.
- Please make sure to use a power adapter for power supply, this will eliminate ground loop noise. Please use a 5V power supply! DO NOT use a mismatched power supply (e.g. 9V / 12V) as this may cause the unit to malfunction.
- The iPhone only supports AAC. For LDAC, you can go to Developer Options( Android ONLY ) and select it.