FERRODAY Dual Gauge Co2 Regulator Beer Kegerator Co2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool

Explanation & Warm tips

1. You can regulate pressure flow with adjustment knob, but the ultimate pressure depends on the setting of ON/OFF valve

2. To check for CO2 leaks, drip some soapy water on the connection between cylinder and regulator. If soapy bubbles form, you may need to tighten or re-attach the regulator, connection nut to CO2 cylinder. If you find leaks, tightening the connection nut or re-attaching does not help, please ask us for assistance

3. The pressure adjustment knob not allow a fine adjustment.

Please move the lock ring then adjust the pressure adjustment knob.

Clockwise means lock the pressure adjustment knobCounterclockwise means opposite

4. As this CO2 regulator is a precision device, when adjusting the pressure valve, please open the ON/OFF Valve first, or this may cause the pressure valve stuck and prevents valve from working properly.

FERRODAY professional dual gauge CO2 keg regulator is most used for homebrew draft beer which fits good with standard

CGA-320 inlet CO2 tanks. Co2 regulator functioned flawlessly to control and monitor both the output pressure and

the cylinder pressure at the same time. The high-pressure gauge of the co2 regulator for cylinder reads between 0-3000 psi and the

lower pressure gauge for output reads between 0-45 psi.

Features:

1. Heavy-duty co2 regulator for long term use;
2. Co2 gauges have high-contrast writing for easy reading;
3. Manual pressure release valve (adjustable) designed for safety concerns;
4. beer keg regulator's big ergonomic adjust knob for precise pressure adjustments;
5. The built-in sintered brass inlet filter of this kegerator co2 regulator keeps dirt out of the regulator for safety!
6. Two durable tank washers were included for this co2 keg regulator to form a tight seal connection with co2 tank;

Package: 1 * CO2 Regulator 2 * Gasket 2 * Clamp

Lifetime Service: please feel free to notify us of any problems, we would try our best to make improvements!