One-Mini-Cord Channel Cord Hider: A good choice when you only have one Mini cord about 0.23" (5.8 mm) in diameter to hide. Mini cord cover wall contains 10 channels, each cable hider is 14.2" L x 0.48" W x 0.3" H. Ideally suited for covering one cable such as lamp cable, monitor cable, speaker cable, Cat-5 or Cat-6 Ethernet cord
Total Length 142" Wire Hider Covers for Cords on Wall: Cable hider contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion. You can follow the instructions for flexibility in securing cable cover and one cord where needed, rather than damaging your wall with screws (not suitable for textured walls)
Finished Installation with Connector-Free Design in Minutes: For easy installation, the Delamu cord covers for wires on wall have no connectors. Even without experience, installation is a breeze. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover
Hide The Unsightly Cable: This paintable and cuttable wall cord cable hider has an extremely slender appearance and a round arc angle profile that subtly matches the wall. Without messy cords, there is more room in your home and office for you to move around
Household Security First: Exposed and unsightly cords may trip up your family. Babies or pets chewing and playing with cables are more likely to cause danger. Install Delamu cord cable management kit to organize unsightly cables and prevent unpredictable accidents
Passing the UL94 V-0 Rating Test: A plastics flammability standard released by Underwriters Laboratories of the United States, UL94 V-0 Rating is defined as Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames, which means it's safer than ordinary materials because of the higher flame retardancy and brings greater security to your daily use
Warm Reminder: CC05 One-Cord Hider is design for a MINI SINGLE Standard-size Cord while maintaining as low of a profile as possible. If you want to hide multiple cables (or larger one cables), you may get larger cord cover raceway kits from Delamu's other cable hiders; 10Pcs x14.2in cord hiders set (not a 142in long raceway)
Product Specifications
Product Dimensions: 142 x 0.48 x 0.04 inches
Item Weight: 9.6 ounces
ASIN: B0811X1RVQ
Item model number: CC05
Customer Reviews: 4.5 out of 5 stars 4,383Reviews
Best Sellers Rank: #1,962 in Electronics (See Top 100 in Electronics) #25 in Cable Raceways
Date First Available: November 5, 2019
Installation Type: Self-Adhesive
UPC: 619660477710
Unit Count: 11.83 Foot
Manufacturer: Delamu
Product Information
Product description
L14.2in W0.48in H0.30in ,total 142 in
MINI One-Cord Cord Hider CC05
Mini Premium Cord Cover Wall: This is a good choice when you only have 1 cable about 0.23 inches (5.8 mm) in diameter to organize and hide
Concealable Common Cords: Speaker/Lamp/Phone/Fax Cables, Ethernet Cords, home and office wires, etc
Passing the UL94 V-0 Rating Test
A plastics flammability standard released by Underwriters Laboratories of the United States, which means it's safer than ordinary materials because of the higher flame retardancy and brings greater security to daily use
Discover Genuine Customer Reviews with Real-life Photos - Hear from Our Buyers
Perfectly Fit and Concealed the Cords!
This cable hider is easy to instal, paintable, and concealed cords
Excellent Cord Cover Kit!
This cord hider cuts down on cord clutter... And since we prefer to hang everything rather than have anything on the floor unnecessarily (makes it easier to run a robot vacuum everyday too), this cable raceway works perfectly for anything corded. I love that the optional sticky back isn’t pre-attached because I hang these with tiny nails while holding them upright against a level. Comes out straight every time. Easy peasy. Highly recommend!
Perfectly Useful Wire Covers for Cords!
It's easy to install and just looks so much neater when it's done
Blends in So Well & Not Even Noticeable!
Very Easy to put up and make level. I cleaned the wall where I was going to place it with rubbing alcohol and used a level to make sure it was even. The beige color nearly matches perfect with my wall too! I am so very pleased with this cable management kit
Excellent One-cord Cable Hider and Easy to Use!
This is an excellent product for ANYONE!
Installation is super easy and extremely fast! This cord hider comes with the adhesive backing and that’s so perfect and convenient! And it’s not super strong because I was able to move it and it didn’t ruin my paint. I’m don’t have ANY tools and I was able to cut cable raceway with scissors.
It’s only made for one cord, which is EXACTLY what I was looking for.
Don’t hesitate, this cord covers for wires on wall is fabulous!
Blend Well & Super Easy & Excellent Adhesion!
I had planned to do in wall cable management for some plug in pendant lights in my guest room, but then found out the wall in question was a fire wall. I ended up using these cable cover and painting to match. I am actually much happier with the final look than I thought I would be. Plus, these cord hider wall were super easy to stick on and hold well
Invisible & Aesthetic
This one-cord cable hider wall provides the most suitable cable raceway for a home or office that only needs to hide a wire and they are not visible
Paintable & Cuttable
The paintable and cuttable wire covers for cords has an extremely slender appearance and a round arc angle profile that subtly matches the wall
Paintable to Match Your Wall
Wire hider is paintable, you can paint any color to match your wall. With a coat of latex-based paint, they’ll just disappear into the background
10 Pre-cut Adhesive Foam Tapes
The cable cover contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion
Delamu One-Cord Cable Management kit
Connector-less Design Cover Cover CC05
One-Cord Channel Cable Cover CC03-9PACK(142in)
One-Cord Channel Cord Hider CC03-6PACK(94.2in)
One-Cable Channel Cable Hider CC03-15PACK(254in)
DELAMU 314in Wire Hider CC03-20PACK
One-Cord Channel Cord Cover CC03-9P Grey(142in)
For easy installation, this Delamu Cord Hiders have no connectors. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover.
Delamu, your wire expert, designed this one cord Wall Cord Concealer to provide the most suitable Cord Hider for a home or office that only needs to hide a single wire.
This is the optimum choice when you have one cable to hide. Designed to enclose a low-voltage cable such as speaker cable, lamp cord. Without messy cords, there is more room for you to move around.
Pay the same but get more raceways and elbows. In this set, you’ll get 15x Cable Hider Channels(16.9in Each), 14x couplings, 6x flat elbows, 2x inside elbows, 2x outside elbows, and 2x tapes.
In addition to its function of concealing cables, this grey single Cable Concealer, Wall Cord Hider Improve the look of your home. Its slim and modern design complements your any decor and furniture.
The Delamu Cable Raceway CC05 can hold up to a single cable about 0.23 inches (5.8 mm) in diameter. Reference: A regular pencil about 0.23 inches (5.8 mm) in diameter.
What is the size?
The wall cord hider kit is made up of 10 raceways. The size of the single raceway is L14.2" x W0.48" x H0.30" , for a total length of about 142 inches. (Please note that it is Not 142 inches long for a single channel).
Does the tape stick?
The tape is very sticky. You'd better plan the route before mounting the raceway to prevent re-installation and wall damage. However, some customers feedback that tape is not sticky, we recommend you wipe the dust on the wall before installation.
How to remove from the wall?
Our tape is very sticky. If you have to remove the tape, please peel it off slowly (or use a knife to gently assist in removing the tape).
Can I use on textured walls?
This wire hider covers for cords can be used on smooth walls, but not on textured walls.