VOYEE Wireless Controllers with Receiver, Compatible with Microsoft Xbox 360/Slim/Windows 11/10/8/7, Upgraded Joystick with Dual Vibration Black

Wireless Controller Compatible With Xbox 360/ Xbox 360 Slim

How to Connect to the Xbox 360 Console or PC?

1. Turn on the console/PC

2. Install The Battery:

Put the battery into the battery box (the battery box is marked with the positive and negative poles of the battery), and put it to the On the back of the controller. The 4 lights of the HOME button on the controller will flash quickly.

3. Insert The Receiver:

Insert the receiver into the USB port of the console/PC, and the green light of the receiver will flash quickly.

4. Pairing State:

Both the lights of the controller and adapter will flash for 3-5s. Once pairing, the light of the controller and the receiver keeps on (wireless connection); the light of the receiver flashes for 10 seconds and then turns off (wired connection).

Note: If the controller fails to pair automatically after the above steps are completed, please press and hold the Pairing Button on the controller for 2s; The controller enters the pairing mode, and the light of the HOME button will start to flash rapidly. Once pairing, the light of the controller and the receiver will keep on.

About Connecting More Than 2 Controllers To The Xbox 360

A receiver cannot be used for multiple xbox 360 controllers.

If you want to connect 4 controllers to the Xbox, you need to ensure that there are 4 usb ports on the Xbox, because one controller must correspond to one adapter.

If you want to connect 4pcs xbox 360 wireless controllers to the xbox at the same time, that means you should plug 4 receivers into the Xbox, otherwise the controllers won't be able to complete the connection.

Reasons for Key or Joystick Drifting or Uncontrolled

It may be caused by accidentally touching the button or joystick while installing the battery, which causes the button or joystick to memorize and maintain this position. For example, when installing the battery, if your hand move the left joystick up, after the controller is connected, the joystick will remain up when using. That's why the joystick doesn't listen to commands.

Solution:

Please remove the battery and install it again. When installing the battery, please do not touch any buttons or joysticks.