for Ninja Blender Blade Replacement Parts 7 Fins Compatible with Nutri Ninja Auto iQ BL642-30 BL482-30 BL682-30 with Silicone Rubber Gaskets Seal Ring Mixer Attachment, Updated

Feilifan For Ninja Blender Replacement Part 7 Fins

Item Type: 7 Fins Extractor Blades Assembly Replacement for Ninja

Amount of Fins: 7 Fins

Model #: 431KKU480

Blade Material: Food Grade Plastic and Stainless Steel

Packing Include: 1 x 7 Fins Extractor Blades Assembly, 1 x Rubber Gaskets

Compatibility:

Fit for Nutri Ninja Series NN100, NN100A, NN101, NN102, BL450-30, BL455-30, BL481-30, BL482-30, BL485, BL486CO, BL487, BL487A, BL487T, BL491, BL492, BL492IS-30, BL494, BL640-30, BL641-30, BL642-30, BL680A-30, BL681A, BL681C, BL682-30, BL682QT-30, BL685-30, BL687CO-30, CT680SS, CT680CO2SS, CT641-30.

REQUIRED READING FOR PURCHASE:

1- We recommend replacing the extractor blade every 5-6 months to obtain the best performance

2- The sealing gasket may loosen during transportation. Please stick it close to the blade for best performance before use

3- Check the bottom gear. If the gear is loose, tighten it counterclockwise

4- Don't run the mixer for more than 4 minutes at a time. Because high-speed rotation will generate a lot of heat, which will not only accelerate the wear of parts but also cause the mixture to scorch due to long-term heating

5- Don't add components beyond the "maximum" line to avoid overflow

6- Please ensure that the blade is in the correct position and locked. If the mixer starts to leak, please replace it with a new washer

7- Please check your mixer regularly. If there is leakage or noise, you need to replace the blade.