FEELWORLD F5 Pro V4 6 Inch Touch Screen DSLR Camera Field Monitor with 3D LUT F970 External Kit Install for Power Wireless Transmission IPS FHD1920x1080 4K HDMI Input Output 5V Type-c Input Tilt Arm

Can't turn on the monitor

Make sure to use the standard 12V 1.5A power adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

Have noise during recording

Long press “<“ button and turn down volume to near zero, can aviod have not nosie during recording. Long press ">" is increase the volume.

The monitor display " no signal"

1）Try another HDMI cable.

2）And please try to connect monitor HDMI to your computer, try if the monitor have signal?

3）Change the camera output singal, confirm the monitor input signal whether support the camera output signal.

When you turn on the focus peak, the information on the monitor will also display the focus peak and other problems.

You can try to turn off the "HDMI Information Display" under the "HDMI Settings" tab in the menu system, so that when the focus is turned on, it will not A similar situation occurred.