ARCTIC BioniX P120 A-RGB (3 Pack, incl. A-RGB Controller) - 120 mm Pressure-Optimised Fan with A-RGB, PWM, Cooler, Fluid Dynamic Bearing, 400-2300 RPM - Black

A-RGB for Full Colour Control

The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.

Easy installation and extension via Connector Technology

The ARCTIC BioniX P120 A-RGB have two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling*. The included connector block also enables a wireless series connection.

*all necessary cables are included

High-quality plain bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Optimised for static pressure

During the development of the new BioniX P120 A-RGB, special emphasis was placed on a focused airstream and thus a high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 A-RGB is particularly suitable for use on covered case vents or inlets with filters.