Black Lives Matter Fist Keychain Epoxy Resin Silicone Molds BLM Tag Pendant Charms Jewelry Casting Set

Package includes：2 silicone molds: #4002 #4003; Keychains not included

Finished product size:

Fist mold_3.46x3.26x0.46inch, cavity 1.9x1.4inch;

Slogan mold_3.6x3.34x0.26inch

Mold color:randomly sent.

Note: all measurements are approximate due to handmade nature and may change when sanded

Finish: gloss ( may require polish or glaze if need a shiniest or most glossy look )

Transparent silicone, so you may check the bottom during project

Food grade. Food and not food material should use separately

Wash and boil before use, especially for food.

Flexible, easy to clean, used in oven, dishwasher, refrigerator.

Suffer temperature -40~220 centigrade (-40~428 Fahrenheit)

More Tips to use with Epoxy Resin:

1) poured in silicone molds in layers, allowing air bubbles completely escape;

2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

Frequently Buy Together!