803040 3.7v 1100mAh Lithium ion Battery Replacement for Sena 10C and Sena 10C pro Motorcycle Bluetooth Camera Bluetooth Headset and DIY 3.7-5V Electronic Products Battery Replacement
★Compatible : SENA 10C,SENA 10C pro Motorcycle Bluetooth Camera Bluetooth Headset。It can also be used in other 3.7-5V electronic products with power less than 4.07Wh (1100mAh).
★803040 rechargeable lithium ion polymer battery, nominal voltage 3.7V, full charge voltage 4.2V, capacity 1100mAh, power 4.07Wh, size 1.594 x 1.181 x 0.315(40×30×8mm) (L*W*T), Weight:0.74z(21g),Maximum current:1.1A。 It can prevent overcharge, overdischarge, overcurrent, and short circuit.
★It‘s consists of of large-capacity A+ lithium battery, Japanese Seiko IC overcharge and overcurrent short circuit protection board, 3302-26 high temperature resistant silicone cable, and genuine JST Pitch1.0mm 2-pin connector module.
★The red wire is the positive electrode “+” and the black wire is the negative pole “-”。In some products, the original battery has no plug or the plug does not match. It doesn't matter. You can directly cut off the plug and weld it or use our heat shrinkable insulating sleeve to connect the wires of the same color.
★If there is any quality problem within one year, please contact us by email at any time and replace it free of charge.
Item dimensions L x W x H: 1.57 x 1.18 x 0.31 inches
Amperage: 1 Amps
Battery Capacity: 1100 Milliamp Hours
UPC: 717664364194
Manufacturer: HXJN
Product Information
Product description
DC 3.7V Model Table of Square Rechargeable Polymer Lithium Battery (applicable to 3.7V-5V electronic products)
Please carefully compare the polarity of the connector before use,the red wire is the positive "+" and the black wire is the negative "-"The yellow (white) lead is a 'thermistor',Do not reverse-charge or reverse-connectreverse.
3-wire batteries retain red and black wires, which can replace 2-wire batteries.
The primary battery of some products has no plug or mismatched plug or mismatched polarity. It doesn't matter, you can cut and solder the plug directly or use our heat shrinkable insulating sleeve to connect the same color wire.