for iPhone 7 Plus Screen Replacement Black,Mobkitfp 5.5" Full Assembly LCD Display Digitizer with Front Camera+Earpiece+Sensors+Waterproof Seal+Repair Tools+Tempered Film for A1784,A1785,A1661 (Black)

MOBKITFP is a brand dedicated to providing high-quality screens to every customers, your satisfaction is our primary goal and lifelong pursue.

Fix your screen with this iPhone 7 Plus screen replacement repair kit, everything you need is included, it will make the repairing job easier.

MOBKITFP for iPhone 7 Plus Screen Replacement, 5.5 inch

Compatible Model: this screen replacement fit for iPhone 7 Plus, model A1784/A1785/A1661, please make sure the model of your device before placing an order.

Every iPhone 7 Plus replacement screen was double-tested before shipping to make sure it works for every buyers perfectly.

Package include:

1. 1*Full assembly screen display replacement for iPhone 7 Plus(with camera, earspeaker, sensors)

2. Repair Tools: 1 x Waterproof Frame Sticker; 1 x Magnetic Mat; 3 x Pry tools; 1 x Tweezers; 3 x Screwdrivers; 1 x Suction cup; 1x Dust wipe; 1 x Sim card pin

3. 1 * Screen Protector for iPhone 7 Plus screen

Warm Tips:

1)DISCONNECT THE BATTERY CABLE FIRST.

2)Plz insert the screwdriver head 90°vertically into the head when twisting it, otherwise, the screws may be stripped.

3)Make sure ALL the connectors are plugged in properly, there will be a "click" sound.

4)Make sure the metal plate over the connectors is settled properly, not too tight or too loose.

5)Test the screen first after connected all cables, make sure everything is good before installing it on the phone.

6)Please use your original home button if you want to retain the touch ID.

FAQ

1. Touch ID do not work after installation, what can I do to retain the touch ID?

1) Touch ID function only work with the original home button assembly for user protection, you have to transfer it from your original iPhone 7 Plus screen.

2) If it still doesn’t work, please try to transfer the LCD metal back plate and the home button cable from your old iPhone 7 Plus display to the new one and reset the setting of the touch ID.

2. There are black/white dots or lines of the screen, what should I do?

This may caused during transportation or installation, please do not press too hard on the top and bottom of the screen backside.

3. Why does the touch of the screen can't work properly?

The touch issue might be caused because the cables are not installed correctly. Please try to unplug the LCD and other cables on the logic board. You could use alcohol and a cotton swab, scrub the connectors gently and wait a few seconds for the alcohol to evaporate before plugging the connectors in. Make sure you connect all the connectors correctly and make sure the metal plate over the connectors are screw down properly.

Please find us via email or Amazon message if you need any assistance.