WARNING!!!
1. DO NOT use in wet environment.
2. DO NOT connect the power meter to a multi-plug outlet to measure multiple electrical appliances at the same time, in case the total power exceeds the threshold of 1800W and cause a short circuit.
NOTICE:
- The consumption and time will NOT be measured and counted when:
- your device is in standby or not working;
- the rated power of your device is smaller than 0.5 watt, but energy consumption is always measured since the device was plugged in.
- What data will be saved? Electricity quantity, cost, electricity p rice, cumulative time. (But NOT save current, voltage, power, power factors)
- You can access to Mode 7 directly by pressing the button “COST”.
- Press any buttons to wake up the backlight after it automatically turns off (Backlight time is adjustable).
- If there is an abnormal display or no response, please reset the electric meter by pressing the RESET button.
WHEN POWER SWITCHED OFF AND BACK ON, IF THE POWER METER TURNS "0", IT MAY BECAUSE THE TESTING TIME IS LESS THAN 1 HOUR, OR TOTAL KWH LESS THAN 0.1 KWH. THAT'S WHY NO DATA SAVED.
- The power of electrical appliances can not exceed 1800W.
- HOW TO RESET:
- If you only want to clear the cumulative data (Electricity quantity, cumulative cost, cumulative time) and keep the electricity p rice setting, just press button "FUNCTION" and "UP" at the same time over 3 seconds to quickly clear the data.
- If you want to reset all the settings, you can press the reset button with the reset tool. Don't use a needle because it may cause the button to get stuck in the device.
- HOW TO SET THE BACKLIGHT TIME:
- Press and hold "UP" and "DOWN" button at the same time to enter backlight time setting. Now "bL-0" is displayed on the LCD and flashes for 10 seconds.
- Press "UP" and "DOWN" to select the backlight time. (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on).
- Press the "COST" to save the backlight time settings.
- When you don't want the backlight on, press the "DOWN" button to turn off the backlight manually.
- You can also press any button to turn on the backlight again.