How to customize keyboard lighting and FN key?
1. LED: Turn on/off the backlight o switch the backlight color. 2. FN + LED: Switch between 1-color and 3-color breathing mode.
3. FN + PU/PD: increase/decrease backlight brightness. 4. FN + +/-: Speed up/slow down breathing rate.
5. FN+W: Exchange WASD and arrow keys. 6. FN + WIN: WIN key lock. 7. FN + (F1-F12): 12 multimedia combination keys.
When your keyboard doesn't work, please note the following.
1.The keyboard and mouse share only one USB receiver, which is located in the bottom of the mouse. (Only when the receiver is plugged in, the lights of the keyboard and mouse will light up)
2. Please fully charge it with the computer's USB port before the first use.
3.No software, just plug the USB receiver into the USB port, turn the switch at the bottom of the keyboard to the ON position, and turn the switch on the bottom of the mouse to the ON (no light) or LED (with light) position.
4. There will be a little delay or the lights will not turn on when the battery is too low, please charge the keyboard/mouse in time, the charging indicator will go off after full charge.
5. Please use a lower than DC:5V adapter to charge to protect battery life, preferably using the computer's USB port to charge directly. Due to the different currents of different computer USB charging ports, some users may need longer charging time to fully charge.
6. Turning off the keyboard light can extend the battery life of the keyboard moderately.
7. If you can't press "WASD" or "↑↓←→". Please press FN+ "W" key to solve this problem.
8.USB Receiver Pairing steps. Make sure the keyboard/mouse fully charged.
Keyboard pairing steps: Step 1: Turn on the keyboard switch; Step 2: Press and hold the ESC key and the K key at the same time, the indicator light starts to flash; Step 3: Insert the USB receiver into the computer, and pairing is complete.
Mouse pairing steps: Step 1: Turn the switch at the bottom of the mouse to the switch position with the sun logo; Step 2: Press and hold the mouse wheel and right button, the mouse RGB lights start to flash; Step 3: Insert the USB receiver into the computer and the pairing is complete.
9. About Mac: Limited MacOS support and need USB port.