CONVENIENT TO USE: When in-wall box and wire installation are not possible, the cat6 ethernet surface mount boxes will do the trick. You can use the included mounting screws or double-stick tape to mount the box to the wall, baseboard, ceiling and other places.
COMPATIBILITY: Compatible with CAT6/CAT5E/CAT5 UTP solid or stranded wire with a maximum cable outside diameter is 6.2mm(0.24 inches).
CAT6 PERFORMANCE: Category 6 rated to meet or exceed Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard up to Gigabit Ethernet speeds for a fast and reliable network.
RELIABLE QUALITY: The keystone surface mount box supports PoE and T568A & T568B wiring standards with 110-style, color-coded termination blocks; Dual IDC terminals accept 110 or Krone impact tools; 360°Metal Shielded housing can reduce EMI/RFI interference for more stable and faster connection.
After-sales Service: 5 x cat6 surface mount box + 10 x mounting screw + 5 x double stick tape, worry-free 18-month warranty, and friendly customer service.
Product Specifications
Product Information
Product description
Versatile Ethernet Jack Surface Mount Box
LINK WORLD LINK FUTURE
Since 2006, we have focused on CATV and networking products, and we are always striving to create a more convenient and easier lifestyle for everyone in daily life, whether you are a DIY-lover or a professional engineer.
Package Content:
5 x Surface Mount Box
10 x Mounting Screws
5 x Double-stick tape
When installing a wall plate isn't practical, these surface mounts will do the trick. Our surface mount boxes provide a convenient and simple way to network your home or office with unshielded 23 to 26 AWG solid or stranded cable.
Each box can be attached to almost any surface via attached double-sided tape and mounting screws. 360°Metal Shielded housing can reduce EMI/RFI interference for a more stable and faster connection.
Housing: PC/ABS.
IDC Terminate: Phosphor bronze with Tin plated.
Support T568A and T568B wiring standards and accept 110 or Krone punch-down tools.
Compatible with CAT6/CAT5E/CAT5 UTP solid or stranded wire with a maximum cable outside diameter is 6.2mm (0.24 inches).
Reliable & Impact Construction
No need to worry it will break easily during installation or daily use.
Phosphor Bronze with Tin plated IDC terminates can break the shell of the cable easily and hold the wires securely.
Easy to Install
Each network biscuit box can be attached to almost any surface via attached double-sided tape, or mounting screws.
Color-code T568A and T568B wiring schemes is friendly to users to avoid wrong wire sequence.
The following operating instructions can help you complete the installation quickly and accurately.
Home and Office Application
Surface mount box opening supports a cable with an outside diameter up to 6.2mm (0.24 inches).
You can get a clean and professional look while reducing interference that can result in a poor connection.
Writable Personalized Label can let you organize your connection more conveniently.
INSTALLATION INSTRUCTIONS
Strip off the jacket of the network cable about 5-7cm.
Separate the wires.
The lid can be easily opened by gently pressing both sides of the box.
Put the wires into the corresponding holes according to the wire diagram.
Place the network cable on the metal plate for holding the cable.
Use 110 or Krone punchdown tool to impact wire and cut off needless wire edge.
Fix the box at any wall-mountable location with screws or double-stick mounting tape.