US Stock 100W Pneumatic Dot Peen Metal Engraving Machine Pneumatic Dot Peen Marking Machine Engraving Size 120x50mm(4.7X2inch) Depth 0.02-1 mm Pneumatic Metal Engraving Machine for VIN,Date

US Stock Pneumatic Metal Marking Machine with Digital Control Engraving Machine for Serial Number,VIN,Date,and other Marks.

Advantages

• Automatic Engrave the Beautiful Marking-Can be Used for Marking Fixed Character,Serial Number,VIN,Date,Graphics and other Marks.
• High Hardness-Hard Alloy Marking Needle can be Used for Marking ＜HRC60 Material
• Long Service life-Put Through Strict Quality Controls, Such As 40 ℃ High Temperature Tests Before Delivery
• Simple Operation-7" Touch Screen Controller can Adjust the Machine.No Need to be Equipped with the Computer.Only to Connect the Air Source.
• Visually Adjust the Air Flow to Adjust the Depth and Thickness of the Marking Content
• 7" Touch Screen Controller with Touch Pen Can Easily Preview the Effect and Track the Marking Footprint.
• Electromagnet Base Can Be Firmly Adsorb to the Metal Surface.Suitable for Large Machinery and Equipment.
• No processing direction restrictions,360° can be marked.
• Portable models can be operated separately within 5M.
• The Intelligent Database with Automatic Memory Has Stored the Working Condition Parameter Settings, Which Can Be Used Directly After Modification.

NOTE:The pneumatic marking machine requires connection to a compressed air source to operate.

Q&A

Q1. What is the service life of pneumatic marking needles?

A: Marking Needles Normal marking on iron requires eight hours a day for about 3 months. If it is painted on aluminum, it will take longer.

The life of the marking needle mainly depends on the hardness of the object being marked, as well as the marking depth.

Q2:How to maintain the pneumatic marking machine recommended?

A:You need to replace the worn marking needle, lubricate the linear guide in the marking machine every week according to the frequency of use.

Q3: What formats does the machine support conversion to?

A:The machine supports keyboard, scanner input, and U disk import of SLG format files,CAD files can be converted into SLG format, and the equipment can automatically print serial numbers.

Q4. What size air compressor is recommended for pneumatic marking machines? Are there any special requirements?

A:Meet 0.4~0.5Mpa, the air output is not less than the air consumption, the compressed air is dry, and the electromagnet can be firmly sucked.

Q5：Does the pneumatic marking machine allow input using a scanner plugged into one of the USB ports?

Yes, click on the input box to scan, which is equivalent to keyboard input. The scanned content can directly generate a marking file.You can also connect a keyboard or connect a barcode scanner to rotate text upside down.

Q6. What is the marking range?

A:Maximum length and width of bottom surface of model 12050:275*140mm(10.83*5.51 inch) ,08040 model 235*130mm(9.25*5.11inch)