OLED Tattoo Battery Power Supply for Rotary Tattoo Machine Portable Rechargeable Coreless Motor for Tattoo Pe (OLED-Black)

Tuffking's New Generation of Cordless Battery is an Upgraded Version on a First-Generation Basis. It is Upgraded from LED Display to OLED Display. It Adopts RCA and DC Interfaces and is Suitable for Different Machines. The Circuit Hardware and Software Algorithm are Newly Upgraded, and the Voltage Range is Wider and Regulated. More Precise and Fast; Designed Two Startup Methods, Normal Startup and Enhanced Startup, to Adapt to Different Application Scenarios; OLED High-Resolution Display, Rich and Clear Display Content; with Overcharge Protection, Pin Card Protection, Output Short-Circuit Protection, and Various Abnormalities Situation Display Text Reminder.

Basic Parameters

Product Name: Tuffking second generation cordless battery (for reference)

Product Model: Tuffking-II (for reference)

Size: 28mm in diameter and 77mm in length

weight: 52g

Output Voltage: 4-12V, 0.1V adjustment

Display Screen: OLED-0.5 inch/resolution 88*48

Battery Capacity: 1300mAh

Working Time: about 6 hours/8V

Charging Time: about 3 hours

Charging Interface: TYPE-C/5V/1A

INSTRUCTION

1. Connect the battery to the machine.

2. Startup/pause: Contains 2 startup modes. In the shutdown state, long press the power button to enter the normal startup mode, then press the power button to start the machine, and then press the power button to stop the machine; in the shutdown state, double-click the power button to enter the enhanced startup mode. Then press the power button to start the machine, it will rise to 10V in 0.2 seconds and then drop to the current set voltage, and then press the power button to stop the machine.

3. Shutdown: Long press the power button to shut down in the power-on state, it will automatically shut down for 5 minutes without output, and it will automatically shut down for 5 minutes with output and no load. When the battery is less than 5%, it will alarm the battery is too low, and then shut down.

4. Voltage adjustment: click the + button to increase the voltage, 0.1V increase, long press the + button to quickly increase the voltage; click the-button to decrease the voltage, 0.1V to decrease, long press the-button to quickly decrease the voltage; voltage range 4- 12V.

5. Charging: Plug in the TYPE-C charging cable to charge, the display will prompt "Charging" when charging, and the display will prompt "Charge complete" after the charging is completed.