Hot Stamping Foil Machine Glimmer Hot Foil System for Card Making Vinyl Film Transfer Hot Foil and Press Machine US Plug 110V Stamping Scrapbooking Tool Kits Heat Press Crafting Foiling Machine

HOT FOIL STAMPING MACHINE

Features：

1.Easy to use (Just heat the platform & chosen plate, create your foiling sandwich, and then run the platform through your die cutting machine. )

2.Compatible with most Die Cutting Machines that have at least a 6" wide platform.

3.Create stunning and eye catching foil designs with the foil plates and heat activated foils.

4.Foil with Metal Dies (*Not all dies are suitable for foiling. Play and experiment.)

5.Use on many materials (You can foil on many materials but you will need to pads accordingly to create optimal foil transfer.)

HOW TO USE HOT FOIL MACHINE

HOW TO USE HOT FOIL MACHINE：

1. Plug in, turn on Machine and wait for it to heat up.

2. Open lid, and place hot foil plate on the heating surface. Wait until light indicator turns from red to green.

3. Place foil on the hot foil plate (colored side facing down).

4. Place card or other desired material on the foil.

5. Add the necessary pads on the platform and roll it slowly through die-cutting machine and back.

6. Remove pad pads. Slowly peel foil and enjoy the nicely foiled image.

HOW TO MINIMIZE AND REMOVE

1.Trim the sharp edges on your heat activated foil pieces so there is not a lot of excess foil. If there is any excess foil, you can use a pencil eraser to help clear away.

IMPORTANT TIPS

IMPORTANT TIPS：

1.Trim the sharp edges on your heat activated foil pieces so there is not a lot of excess foil. If there is any excess foil, you can use a pencil eraser to help clear away.

2.**Use a metal pads or card pad where necessary to create the ideal pressure.(NOTE: *The thickness of pads depends on the hot foil plate, the material and die-cutting machine you use. You need to test out how many pad you need to get the best results!)

3.Pass the Heating Platform slowly through your die-cutting machine to ensure an even foil transfer.

4.Always use your tweezers to remove the hot foil plate from the machine, and put it on the silicone cooling mat.

5.Use thermal foils, which means that heat activates the foil to transfer the image onto your substrate.

6.We recommend that you use smooth surfaces rather than textured surfaces to get the best foil impression.

PACKAGE CONTENT

Included in the Box:

1 x Foiling Platform with Cover

1 x Silicone Cooling Mat

1 x Magnetic Tweezers

1 x Heat Insulation Pad

1 x Power Cord（US/EU/UK）

1 x Heat Activated Foil Roll

1 x Instruction Manual

(Note:**Product intended for use in country or region intended. )