Baby Proofing, Clear Edge Protector Strip, Soft Corner Protectors for Kids, Baby Child Safety Corner Guards for Furniture Against Sharp Corners for Tables, Drawers, Sink, Wall 1.2in x 3.3ft

Steps:

1. Clean the table's corners and remove any surface stains.

2. Peel off the bumper tape and apply it in the right place.

3. Stick the bumper tape firmly and smooth any unevenness with your hands.

Tips：

1. Installation Tips: Please clean the installation of dust and water stains and other impurities before installation, after installation it is recommended 12 hours after the sticky effect is better.

2. gluing tips: Please mark in advance when installing to avoid repeated sticking, please do not touch with your hands, so as not to affect the adhesive effect!

3. how to remove: can use a hair dryer to remove the adhesive place heat slowly tear off, such as sticky residue available hot towel with detergent wipe clean!

4. about the smell: prefer material without irritating odor, in the transportation process can form some taste, after receiving a few hours of ventilation is not OK!

Important troubleshooting tips:

1. Please note: Not recommended for use on unstable painted surfaces, rough surfaces, dusty surfaces, wet surfaces, or uneven surfaces. Our tapes are very sticky to avoid situations where the wall may peel off when the tape is removed.

2. Before use -- make sure the contact surface is clean and dry.

AFTER APPLICATION -- Press firmly for 20 seconds after application to ensure the tape is in full contact with the surface; this will help ensure long-lasting adhesion.

3. TO REMOVE -- Use hot air from a hair dryer to soften the tape, or use a damp cloth to remove it more easily. You can then use a sharp tool to slowly lift the tape from one side and slowly peel it off the surface of the item.

4. it is best to put the remaining product in the original bag after use, otherwise, it will be too sticky and stick to something else, making it difficult to tear off.

5. Store the tape in a cool, normal environment, out of direct sunlight. If the tape is exposed to direct sunlight for a long period of time, the color of the tape surface may turn yellow. However, the yellowing of the tape does not affect the product's normal use, and the adhesive properties of the tape function normally in use.