BITFUNX RetroScaler N64 Wireless Controller Adapter - Supports N64 Game Console, Compatible with PS3/PS4/PS5, Xbox One S, Series X/S, Switch Pro Bluetooth Controllers

RetroScaler Game Controller Adapter for N64 Console

>Note:

• This prodcut can't support hot plugging. Please insert it into the controller port before turning on the power of the console.

LED Status:

• RED LED FULLY ON: Bluetooth failure
• RED LED pulsing: Searching wireless controller
• BLUE LED FULLY ON: Bluetooth connected successfully

Buttons:

• Short press: Disconnect all Bluetooth devices and start the new pairing.
• 10 sec hold: Restore to default configurations and clear BT pairing keys.

FAQ:

Q1: Is there another way to update the firmware on my device?

Also, is there a way to customize the button mapping for my Xbox Series X controller?

A1: 1.Press and hold the button for about 10 seconds until the light blinks rapidly, then wait for it to return to normal on its own before updating using google chrome.

2.For button configuration see this:

github.com/darthcloud/BlueRetro/wiki/BlueRetro-BLE-Web-Config-User-Manual#24---mapping-config

Q2: "Uncaught TypeError: Cannot read properties of null (reading '0') (Your browser may not support this feature)

A2: If the browser version is low, please update it to the latest version. Otherwise, you can only disconnect and connect several times. Note: Do not pair the joystick while connected to the computer.

Q3: The website provided earlier did not provide any information on how to change the button mapping.

A3: The following link, when clicked on, is information describing how to change the button mapping.

github.com/darthcloud/BlueRetro/wiki/BlueRetro-BLE-Web-Config-User-Manual#24---mapping-config

Q4: I have trouble connecting to the adapter with a switch controller. it’s only worked about twice. It is a Nintendo 64 switch wireless controller it works fine when connected but it takes a while to connect?

A4: Press and hold the boot button for about 10 seconds, the light will flash quickly to enter the clear configuration mode, then wait for it to slowly return to normal, then unplug the adapter, turn on the Bluetooth of the controller, then plug the adapter into the host and wait for the controller to connect.

Q5: Unable to connect to the original PS4 and PS3 controllers?

A5: 1.Pay attention to whether the PS4 controller light flashes correctly and whether Bluetooth is turned on. 2.The original PS3 controller has a clear operation tutorial, so follow the tutorial.