TIPS FOR OPERATION A RIVER TABLE:

1.For best results, keep room temperature at 68℉ or lower. In unventilated areas, please use fans to dissipate heat. (Be sure to avoid airflow blowing directly onto the resin surface to avoid ripples)

2.Avoid working in high humidity(Recommended Application Humidity: <85% RH). We recommend using this product on a leveled and flatwork surface.

3.The material must be mixed thoroughly for at least 3-5 minutes. Be sure to scrape the container sides, bottom, and corners as you mix.

4.We recommend mixing no more than 1 gallon at a time. lf the mixing volume is large, please mix in batches to ensure thorough mixing.

5.The maximum one-time pouring volume can reach 10KG-15KG, but in order to obtain for the best effect, when the depth exceeds 3 inches and the resin volume exceeds 12KG, it is recommended to operate in layers.

6.lf you are going to make a second pour, the first pour should hard and tacky. Once the second pour is made, bubbles may once again need to be removed. Material will feel hard after around 24 hours but full cure and maximum hardness can require up to 7 days. depending upon the temperature.

7.Bubble Removal: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The bubble will rise to the surface and pop.

TIPS TO AVOID STICKY/SOFT RESIN:

1.Accurate measuring. Following the correct 2A:1B ratio by volume. 2.Mixing resin properly. Be sure to scrape the sides of your cup for equal mixing. 3.Do not cure in low temperatures. the ideal cure resin temperature is 60°F-85°F(The recommended temperature for making a river table is 68℉ or lower). 4.Please do not add more than 6% of the total combined volume of resin and hardener.