Resin Shaker Molds Set Large Rectangular Photo Frame Pack of 3 Epoxy Silicone Trays Precision Tip Applicator Bottle Kit Bundle

Shaker Mold Features:

Material: silicone

Color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:

1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay/ resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

All-in-One Ultimate Needle Oiler

1. Leak-proof rubber stopper prevents drying and leakage.

2. User-friendly precision nozzle for easy application.

3. Convenient refill capability.

4. UV protection safeguards against liquid hardening due to light exposure.

Customizable Reusable Bottles for Your Unique Labeling Needs

Precision-Tip Nozzle: Finely for Accuracy

Fine 1mm nozzle for precise liquid control, ideal for delicate craftsmanship.

Repairing small ornaments.

Fitting into the small grooves of shaker molds.

Nozzle thickness: 1mm.