Global Trade Identification Number: 00799599562449
Manufacturer: Grid Connect Inc
Product Information
The PCAN-USB-PRO FD adapter connects a USB port to CAN and LIN networks. Two CAN/LIN buses can be connected at the same time, with up to software four connections available using appropriate adapter cables (2 x CAN, 2 x LIN). The CAN USB PRO FD is housed in a robust aluminum casing making the PCAN-USB Pro FD adapter suitable for all types of applications.
The CAN USB Pro FD supports the new CAN FD standard and is 100% hardware & software compatible with the PCAN-USB Pro adapter.
From the manufacturer
CAN USB PRO FD Adapter - 2 Channels: CAN & LIN (GC-CAN-USB- PRO-FD)
Product Information
The PCAN-USB Pro FD adapter enables the connection of CAN FD and LIN networks to a computer via USB. Two field buses can be connected at the same time, up to four with appropriate adapter cables (2 x CAN FD, 2 x LIN). Each CAN FD channel is separately isolated against USB and LIN with a maximum of 500 Volts. Its robust aluminum casing makes the PCAN-USB Pro FD adapter suitable for mobile applications.
The new CAN FD standard (CAN with Flexible Data Rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downwardcompatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks.
FEATURES:
Baud rates up to 1MBaud
CAN 2.0A and 2.0B
Supports all interrupt and port addresses configurations of the USB interface
Full 500V isolation
High Speed USB 2.0
Measurement of CAN errors and bus loading
LIN master or slave
Event scheduler
Pin Configuration
+5V (optional)
CAN-L
CAN-GND
LIN
LIN-GND
LIN-GND
CAN-H
Not Connected
Vbat-LIN
Maximum Bus Length
High-Speed-CAN networks may have bit rates of up to 1 Mbit/s. The maximum bus length depends primarily on the bit rate.
For CAN FD, the same maximum bus lengths apply as for CAN, despite the higher data bit rate of CAN FD.
The dependency is based on the bit rate during the arbitration, called nominal bit rate. The nominal bite rate at CAN FD can be up to 1 Mbit/s.
The CAN USB Pro FD includes the software:
PCAN-View for Windows
LIN monitor PLIN-View for Windows
Software programming interfaces PCAN-Basic and PLIN-API
CAN & LIN operation properties
Complies with CAN specifications 2.0A/B and FD
CAN FD support for ISO and Non-ISO standard switchable
CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
CAN bit rates from 25 kbit/s up to 1 Mbit/s
FPGA implementation of the CAN FD controller
NXP TJA1044GT CAN transceiver
Each CAN FD channel is separately opto-decoupled against USB and LIN up to 500 V
CAN termination can be activated through a solder jumper, separately for each CAN channel
Measurements of bus load including error frames and overload frames on the physical bus
LIN - Bit rates from 1 up to 20 kbit/s
LIN - TJA1021/20 LIN transceiver
Compliant with all LIN specifications (up to version 2.2)
Both LIN channels (common ground) are opto-decoupled against USB and CAN FD
Can be used as a LIN master or slave (1 ms master task resolution)
LIN - Hardware can work through a schedule table (up to 8 tables can be configured with a total of 256 slots)