To install, connect the red wire to your car’s ACC (Accessory) fuse, the black wire to the metal ground or negative pole, and the yellow wire to the battery’s positive pole. Ensure all connections are secure and insulated to prevent short circuits.
NOTES:
Adjustable voltage function is favourable to voltage control of the dash camera and hardwire. Battery protection:11V-13.5V
1. Press and hold any button for 3 seconds to turn on the LED2. Press the +/- buttons to adjust the cut off voltage.3. After setting the cut off voltage, please wait until the LED flashes 3 times, your setting is confirmed.4. We recommend 11.8V as the cut off voltage
As for precautions, it’s crucial to disconnect the vehicle’s battery before installation to avoid any electrical mishaps. Also, professional installation is recommended if you’re unfamiliar with car wiring systems. Always refer to your vehicle’s fuse diagram and the device’s manual for specific installation instructions. Safety first!
Warm tips:
Make sure all connections are secure, tuck away any excess wires, and make sure they are safely routed to avoid interference with vehicle controls.
Since the installation method is different for each vehicle, it is impossible to provide more detailed installation instructions. If you encounter any problems during installation, please search the YouTube website for the specific vehicle model and installation instructions for the hardwire kit.