Xion Lab 2 in 1 Rust Converter & Metal Primer - Covers Up to 4X More - Industrial Grade Water Based UV Resistant Rust Reformer - No Top Coat Needed - Rust Inhibitor Works On Damp Surfaces (Pint)
THE ONLY RUST CONVERTER FOR METAL THAT CAN BE APPLIED ON DAMP SURFACES! Save precious time and effort with the XIONLAB ultimate rust reformer. Our rusty metal primer is specifically designed to stop rust by converting EVEN DAMP rusted metal surfaces to phosphate without heavy scraping or sand blasting!
COVER 4X MORE AREA & GET A BIGGER BANG FOR YOUR BUCK! Our rust neutralizer will cover up to 1000 square feet per gallon, and up to 125 sq. ft. per pint, so you can protect your metal surfaces from further corrosion. You can dilute it with 20% water and use a spray gun to apply this one-step rust treatment solution to all your rusty metallic surfaces with ZERO EFFORT!
CAN ACCEPT ALL TOP COATINGS – NOT JUST OIL-BASED! You can easily apply oil based, water based, enamels or any other top coating you like. OR you can go ahead and save your hard- earned money and skip on the top coating, since our industrial-strength rust remover and primer does not require a top coat!
CLEANING YOUR TOOLS IS A BREEZE thanks to our water-based formula, your tools can be washed quickly without any soap or chemical products. Plus, our UV and Hydrogen Sulfide resistant, professional-grade corrosion converter is safer for environment, non flammable, contains less than 1% VOCs, NO lead, and NO oily solvents nor resins.
GET YOUR ANTI RUST METAL SOLUTION TODAY 100% RISK-FREE! Our mission is to offer you pro-grade solutions for your renovation or construction projects. And we know that impeccable quality is your top priority. That’s why we confidently back our rust eliminator with our EXCLUSIVE full-money back guarantee! What are you waiting for?
Product Specifications
Manufacturer: Xion Lab
Brand: Xion Lab
Item Weight: 1.85 pounds
Product Dimensions: 3.5 x 3.5 x 3.5 inches
Manufacturer Part Number: XL07
Special Features: Expands and contracts with metal: in lab tests, withstood 300º F (149ºC) for 90 days without cracking or peeling, Bonds with rust, cures hard as cement, no scraping, no sandblasting, Save time - Can be applied to damp surface. Does not trap moisture, Water Based. Tools clean up with water, Save time - Only one application needed, and no top coat required
Wire brush surface to remove all loose flaky rust.
Do not brush down to bare metal: XionLab Rust Converter product bonds best to a rusty surface.
Wipe away debris with a cloth, brush or air pressure. All grease and oil must be completely removed from the surface. rinse thoroughly.
Stir well
Stir the product thoroughly until a smooth. Even consistency is obtained.
Apllication
Apply the product with a brush. roller or sprayer. Make sure the metal surface is uniformly covered. for spray application: dilute with up to 15% water to a 0.5-1 mil dry film thickness.
Dry & Curing Time
Allow the 2-in-1 converter & primer to dry completely for 48 hours before applying a top coat. If a top coat is to be applied using only one coat of product.
IF not applying a top coat, a 2nd coat of product may be applied before the first coat has dried within 2 to 4 hours.