New brothread Tear Away Machine Embroidery Stabilizer Backing 12" x 50 Yd roll - Medium Weight 1.8 oz - Cut into Variable Sizes - for Machine Embroidery and Hand Sewing

Tear Away Embroidery (Medium Weight 1.8oz)

Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.

It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather...

Cut Away Embroidery (Medium Weight 2.5oz)

Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.

Cut away stabilizer is considered the most stable stabilizer.

It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.

Wash Away Embroidery Stabilizer (Light Weight 1.5oz)

If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.

The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.

Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.

No Show Mesh Embroidery Stabilizer (Light Weight 1.8oz)

No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design.

No show mesh stabilizer is recommended for light colored fabrics.

It is extremely soft for baby garment and some fabric when soft is a very important consideration.

Water Soluble Topping Film (Light Weight 25Mircon))

Water Soluble Toppings are used only on the top of the fabric to control the nap of the fabric. It is best used on napped fabrics such as towels, knits, velvets, or velveteens to prevent the stitch sinking into fabric. They are too lightweight to be used as the backing stabilizer.

Fusible Iron On Embroidery Stabilizer (Light&Medium Weight)

Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.

Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.

Black Machine Embroidery Stabilizer Backing

Black embroidery stabilizer is very useful on similarly colored garments or fabrics.

New brothread supply 3 kinds of black embroidery stabilizer: black cut away, black tear away, black no show mesh.

Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing

Sticky Tear Away Embroidery Stabilizer is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue.