Very High Bond Sticky Adhesive, AZXYI 9 Pack Adhesive Replacement for Socket Base, 1.4 inches Double Sided Sticker Tapes for Phone Collapsible Grip & Stand Base

Here are some important notes to keep in mind when using the adhesive:

1.Remove the Old Adhesive: Start by carefully removing the old sticky adhesive glue dots and any residue from the surface. Thoroughly clean the surface, making sure it is completely dry before proceeding.

2.Surface Selection: Choose a flat and smooth surface for installation to achieve the best results. Irregularities or texture on the surface can interfere with the adhesive's ability to form a strong bond.

3.Peeling the Adhesive Tape: If you find that the refill self-adhesive tape is difficult to peel, try pressing back on the tape and then pressing again. This can help loosen the adhesive and make it easier to peel. Avoid using excessive force, as this could damage the tape or the surface you're working on.

4.Attach the Adhesive: Carefully align the new adhesive to the base of the socket or mount that you're attaching them to. Press down firmly and evenly for 5-10 minutes to ensure a strong and secure connection. Make sure to avoid any air bubbles or gaps between the adhesive and the surface.

5.Allow Time for Adhesion: It's crucial to wait at least 24 hours after re-sticking the adhesive before using them. This allows the adhesive to fully cure and set, ensuring a strong and secure connection. Attempting to use the mount before the adhesive has had time to cure could compromise the connection and lead to premature failure.

By following these important notes, you can ensure that your adhesive are installed correctly and will perform reliably over time.