PBD HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier, with 4G 5G LTE Filter, Professional-Grade Signal Booster

PBD Outdoor TV Antenna Amplifier

Increase your reception quality by strengthening the signal from channels in your area. Low-noise amplification improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. It reduces signal dropouts and features input and output coax connections making it compatible with a wide range of antenna brands and models.

Package Contents

1 - Amplifier

1 - 5 FT long RG6 Coaxial cable

1 - Power Insert

1 - UL adaptor

1 - USB Power Cable

Note: Using an amplifier does not 100% make sure you will pick up more TV channels even though your signal is amplified. The TV channels available in your area depends on many things - such as location of TV towers, building materials and the actual antenna being used. What the amplifier will do, is help to distribute the signal that you do get to your TV, overcoming loss from the coax cable or the loss associated with splitting the signal to multiple TV’s. A new channel scan must be done on the TV if the antenna has moved or if an amplifier has been added.

Works with Any Non-Amplified/Passive TV Antenna

More Range, More Channels, Better TV Reception CX-208

Extend the range and signal quality of your non-amplified digital HDTV antenna with the CX-208 Outdoor Digital TV Antenna Amplifier. It features TwinAmp Technology, which separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.

This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation — maintaining the purest signal path possible.

Installs on any outdoor non-amplified TV antenna

Bandpass filters remove interfering RF signals

Maximum Gain (typical): VHF 16 dB UHF:25dB

Noise Figure (typical): 1dB

Power: +5V at 1.0A

Test the antenna indoor before finding an outdoor location to mount your antenna, and make sure the Pre-amplifier indicator light is working.

Locate the amplifier as close to the antenna as possible, so your amplifying antenna signal but not amplifying line noise on the cable run.