Nicpro 32 Ounce Crystal Clear Epoxy Resin Kit, DIY Starter Epoxy Resin Supplies with 4 Measuring Cups, 2 Silicone Sticks, Gloves, Spreader for Craft Casting & Coasting, Molds, Jewelry Making

Food Safe

Made of premium non-toxic material, our epoxy resin features by low odor & food safe,no worry to use.

Self Leveling

Create glass-like clear finish on almost any surface with self leveling design,No worries about craters and other imperfections

Non-Yellowing

Nicpro epoxy resin contains both a UV stabilizer and advanced additive resistant to yellowing

Hard As Rock

After curing our epoxy resin will hard as rock ,which the hardness after curing is 90HV+

MIX 1:1 ratio

Measure-According to your work, pour equal amounts of resin and hardener into a mixing cup. ( For refer :16 oz Starter Kit covers 4 sq. ft. )

please make you project in room temperature, the resin will cure faster when temperature is higher.

• Tip1:If your resin is cold, place unopened bottles of resin and hardener in a container of warm water before mix.
• Tip2: ideal working temperature is between 70°F and 85°F, if the room temperature is low,the mixture will takes longer to cure.

Stirring

Stirring slowly for 3 minutes at least , until uniform mixed.

Pour into Mold

Just pour the liquid mixture over your project and spread ,tidy it up with a brush if needed.you can add resin pigment or mica powder. (Wait 3-5 hours until your resin reaches a jelly like stage, then put dried flowers or other decoration in and pour second coat.)

Wait to Cure

Allow to cure for 8-24 hours ( please notice: the cure time of mixture is based on the resin volume, the larger volume the faster it will cure, so thin areas take longer to cure)

Tip1: If you want the resin cure faster, you can use heat lamps to encourage a quicker cure