Frisco Craft Transfer Tape for Heat Transfer Vinyl - Iron on Clear Tape for Printable and Patterned Htv, Indoor & Outdoor Adhesive Vinyl - Reusable Up to 5 Times, High Tack (12" x 50 ft)

High Heat Resistant

It withstands temperatures up to 350°F for 30 seconds, ensuring a smooth transfer every time. For printable HTV that requires higher temperatures or longer pressing times, we recommend doing a small test before applying to your final project. Always follow the specific instructions for your HTV to achieve the best results.

Crystal Clear Alignment

Its crystal-clear design lets you see exactly where you're placing your design, ensuring flawless alignment every time. Whether you’re working on intricate details or large projects, this tape makes positioning straightforward and accurate.

No Sticky Residue

Lift and transfer your designs effortlessly, with zero mess. Our transfer tape leaves no sticky residue behind, ensuring a clean, smooth finish every time. Perfect for keeping your projects pristine from start to finish.

Reusable Up to 5 Times

Maximize your value with our durable transfer tape for HTV that’s built to last. You can use, reuse, and repeat up to five times, making each roll go further. Enjoy consistent results across multiple projects without the need for constant replacements.

Print, Cut, & Cover

Print your design and cut it to size. Next, cut the heat mask/transfer tape slightly larger than your graphic for full coverage.

Peel off the liner from the heat mask, then place it adhesive side up on a smooth surface. Carefully lay your cut design face down onto the tape, ensuring it adheres evenly for a flawless transfer.

Apply with a Squeegee

Place your printed and weeded graphic onto the adhesive side of the heat mask/transfer tape, starting from the center and gently pressing down towards the edges.

Use a squeegee to firmly adhere the graphic to the tape. Begin at the center and work your way outward with overlapping strokes to ensure a smooth, bubble-free transfer.

See Instructions for Pressure, Heat, & Press Time

Start by peeling off the print media liner from the graphic, beginning at one corner and removing it in a smooth, continuous motion.

If you’re pressing immediately, transfer the graphic, still covered by the heat mask, to the textile. Follow the vinyl’s specific instructions for pressure, heat, and dwell time to ensure a perfect transfer.

Peel & Reveal

Say goodbye to wrinkled or ruined projects! Our premium HTV transfer tape ensures flawless results with every use.

Made from durable polyester, this tape withstands high heat and remains clear for precise alignment. Its unique adhesive system leaves no residue after removal and is reusable up to five times, making it a reliable choice for all your crafting needs.