High-Speed Data Transfer: The cat7/cat6a modular connector supports up to 10 Gigabit transmission speeds. Metal-shielded shell eliminates cross-talk and prevents electromagnetic interference (EMI), ensuring a more stable connection.
DIY RJ45 CABLE shielded connector terminates shielded twisted pair solid cable for making custom length Ethernet patch cords; Supports CAT6A CAT7 STP/FTP 23 AWG round solid or stranded wire (not compatible with CAT8, Cat6, Cat5e and Cat5 versions), for wire core OD 1.35~1.45mm. The wire OD of cables with the same AWG specifications may vary depending on the manufacturer. Please ensure wire OD MUST meet the requirements. (Flat cable not supported due to difficult installation)
Easy to use: Pass-thru RJ45 end allows you to identify wire sequence before crimping. To avoid wrong wire lining problem and waste. It's also easier insert the wires through the connector with the help of the attached lord bars.
50u Gold-Plated Contacts: 3-Prong contacts can increase the contact area and enhance conductivity. We also apply thicker and well-proportioned gold-plated contacts to ensure stronger, more stable transmission. The boots' material is new environmentally friendly material PVC, which is durable, flame-retardant, and resistant to bending.
Package Content: 30 x CAT7/CAT6A Pass Through Shielded Connectors + 30 x CAT7/CAT6A Strain Relief Boots (Orange)+30 x Load Bar. 18-month warranty for quality problem, just use it without concern.
Product Specifications
Product Information
Product description
VCELINK 2-Piece CAT7 RJ45 Shielded Connectors
Suitable for 23 AWG cables with an insulation diameter of 1.35mm-1.45mm
2-Piece Design:With load bar easy to line up conductors inside heads, reduce installation difficulty. Suitable Strain Relief Boots also included in the package, you do not need to buy them separately.
Please Note:
The RJ45 crimp plug is not compatible with installation cables of the versions Cat8,Cat6, Cat5e and Cat5. (If you use cat6 cat5e ethernet cables, there may be have the problem like the pins to do not properly align)
If the connector is not crimped well, maybe the wires are not cut straight and maybe only insulation was pressed or only part of the wire.
Please ensure wire OD (1.35mm-1.45mm) MUST meet the requirements. If the wire OD is too thick, the core wire cannot be inserted into the plug, and if the wire OD is too thin, the core wire will move in the Load bar, resulting in unsuccessful crimping. (Flat cable not supported due to difficult installation)
The benefits of the Pass Through RJ45 connector
RJ45 Crimp Plugs:CAT7 Pass Through Connectors simplify your operation steps, let you quickly complete the crimping work of the RJ45 Plugs, and enjoy the category7 network transmission speed.
OPERATION CAUTIONS
Please pay attention to check whether your wire sequence if it is right,the wire sequence will determine your success; In addition, please check whether the blade is correctly inserted into CAT7 solid wire after crimping.
Both invalid contact in the plug and incorrect wire sequence are frequent sources of error.
If the connector that is not crimped well, may be the wires are not cut straight or insulation was pressed only part of the wire.
GJ670BL: RJ45 Pass Through Crimping Tool for Cat5 Cat5e Cat6 Cat7 Modular Plugs Connectors.
GJ671BL: RJ45 Pass Through Crimping Tool for Cat7 Cat6 Cat5 RJ45 Connectors and RJ11、RJ12 modular plugs, it also can crimping dovetail clip.