TransOurDream Tru-Heat Transfer Paper for Inkjet & Laserjet Printer (20 Sheets, 8.5x11", Dark 3.0) Printable HTV Heat Transfer Vinyl for T Shirts Iron on Transfers for Dark Fabrics (TRANS-D3-20)

IRON - TRANSFER STEPS

1. Set iron to Cotton/Jeans Setting and TURN OFF steam.
2. Apply FIRM,EVEN and HEAVY pressure and iron each area of the image for 5 seconds.Circularly press and iron the image. (A4 size image, press 3-5 minutes. 1/2 A4 size image, press 2-3 minutes. 1/4 A4 size image, press 1.5-2 minutes )
3. Ensure that all areas of the image is ironed, especially the corners and edges.

NOTES:

• Apply ENOUGH pressure on the transfer as more pressure will help transfer all of the print onto the fabric.
• INSUFFICIENT PRESSURE and IRONING TIME would achieve poor transfer result - the transferred image may peel off.

EASY PRESS - TRANSFER STEPS

Temperature and Time may vary based on easy heat press type and image size. Suggest you do a test before transfer onto t-shirts.

Suggest set time and temperature as below:

• A4 size image, 170℃(338℉), 120 seconds.
• 1/2 A4 size image, 170℃(338℉), 90 seconds.
• 1/4 A4 size image, 170℃(338℉), 30 seconds.

1. At first, heat press the whole image slowly from one side to the other side.
2. Apply HEAVY pressure on each area of the image for 10 seconds, circularly iron the whole image 4times (80 seconds in total).
3. At last, heat press each corner of the image for 10~20 seconds. NOTES: If the corner peels off, cover the teflon paper(in the pack) and heat press it for another 10~20 seconds.

HEAT PRESS - TRANSFER STEPS

• Set Temperature to 170℃(338°F).
• Set Time to 10 seconds.
• Apply MEDIUM pressure.

Step 1: PRINT

Print your design on the BLANK Side of transfer paper.

Inkjet Printer Settings:

• Set Paper Type to Plain Paper or Photo Paper.
• Set Printing Quality to Photo or High Quality Photo.
• No MIRROR Printing.

Laserjet Printer Settings:

• Set Paper Type to Label Paper.
• Choose 180g and above.
• No MIRROR Printing.

Step 2: CUT & PEEL

1. Cut out your design: Use scissors or cutting machine, such as Silhouette and more.
2. Peel your design from the backing LOGO paper. NOTES: Transfer Paper is composed of two layers - the BLANK film and the backing LOGO paper.

Step 3: PLACE

1. Remove Creases: Place your t-shirt on a SOLID surface (Don’t use ironing board as it’s too soft) and use your ironing tool to smooth out creases on t-shirt.
2. Place your design facing UPWARD onto appropriate position of T-shirt.
3. Cover it with Teflon Paper (included in the pack). NOTES: The teflon paper both sides can be used. No wrong side.

Step 4: TRANSFER

Please refer to the specific operations for your ironing tool accordingly in the above figure.

• IRON - Please see IRON - TRANSFER STEPS.
• EASY PRESS - Please see EASY PRESS - TRANSFER STEPS.
• HEAT PRESS MACHINE - Please see HEAT PRESS - TRANSFER STEPS.

Step 5: REMOVE TEFLON PAPER

After ironing done, peel off teflon paper in a quick and smooth action.

Step 6: DONE

Congratulations! Your DIY image transfer has been done. Enjoy!

For Step-by-Step video tutorial, please refer to our product videos on this page.