1.How Can I Transmit To Multiple TVs?
The sender does support multiple receivers. If you wish to transmit to a second TV additional receivers are available. Keep Transmitter and receiver setting at the same channel, it can support 1 transmitter and more receivers at the same time.
2. The image is interfered.
A).Please adjust the angle of the antenna for 2.4GHz transmitter and the receiver.
B).Please try to change the 2.4GHz transmission channel for the transmitter and the receiver.
C).If allowed, please put the transmitter and the receiver in a higher place to strengthen the wireless transmission.
3.Why Is My Video Black and White?
If the image transmits in Black & White, the video cable may be connected to a Component Video input: these are Red,Blue, and Green, Some TVs will have a Yellow RCA connection built into the Green Component connection. It may be necessary to change your TV settings to enable the Video input option. To find information that is specific to your TV, please check your TV's user manual
4. If the channel display do not light up and there is no image.
A). Please check the power connection of the transmitter and receiver, open the power switch.
B). Please try to change the 2.4GHz transmission channel for the transmitter and the receiver.
C),Please check if the transmitter and the receiver are connected correctly (Refer to installation instruction).
5.What If They Don't Connect?
A).Please ensure that the transmitter and receiver are within the range of each other, If the signal pass through walls and floors, the transmission distance will reduce to 32.8ft/10m only. Line of sight is recommended as obstacles can reduce the transmission distance.
B). Confirm that both power switches are set to the ON position and that the channel selection switches are set to the same number.
C).Test each channel to improve signal strength and avoid interference.
D).All wireless devices may be subject to interference, which may result in a loss of signal, or intermittent signal. To correct interference issues we recommend adjusting the antennas or the position of the transmitter and receiver by moving them away from sources of interference. Sources of interference can be devices such as cordless phones, wireless routers and microwaves.
6.How Can I Connect The sender To My Coaxial, BNC,or HDMI Source Device?
The sender requires an RCA connection for operation. If you wish to connect to another connection type you will need an adapter (Coaxial to RCA,BNC to RCA)or a converter(HDMl to RCA).Many adapters and converters are available for different connection types.
Note; If trving to connect to a Coaxial or HDMI TV an adapter or converter can still be used but must be the reverse type (RCA to HDMI, RCA to Coaxial).
Amazon US
Contact
