LiME LiNE Spin-able Automotive Grade Metal Leafing (Copper)

Spray the glue

• Apply 2-3 light coats of LiME LiNE Spray-able Leafing glue as directed with any airbrush
• Spray on thin and light not allowing the glue to puddle which creates an uneven texture that will transfer to the leaf

Lay the leaf

• LiME LiNE Glue has a 2-5 min dry time
• Apply leafing to the tacky glue surface
• Allow leaf to slightly overlap between sheets

Roll & Burnish

Use the LiME LiNE brush to:

• Remove excess material
• Burnish the leaf to an uniform appearance

Use the LiME LiNE Leaf Roller to:

• Roll leaf to make a solid contact with sizing glue
• Run roller across the border to make a cleaner edge once the tape in removed

No wait time! Leaf is ready for spinning

Spin (engine turn)

• Use LiME LiNE leaf spinner tool with the provided 3000 or 5000 grit sanding pads
• Spin the leaf using 1/4" inch turns
• For best results repeat a 30-40% overlap

No Wait Time!! leaf is ready for clearcoat