RX Only, Wireless HDMI Extender Receiver, Up to 1 TX to 4 RX Connections, Max Line-of-Sight Transmission Distance 1 TX to 1 RX (250m), 1 TX to 2 RX (230m), 1 TX to 3 RX (210m), 1 TX to 4 RX (190m)

Why choose our wireless HDMI Transmitter and Receiver？

• Built-in ESD electrostatic protection circuit, all-round protection of system security.
• Easy installation, plug-and-play, no additional settings.Avoid the cost and time of installing complex and expensive wiring infrastructure.
• Support IR pass-back with 20-60KHzfrequency,with local loop-out function.
• 1080P high-definition picture quality, support 1080P@60Hz high-definition resolution, support 60 times per second picture update frequency, clear and natural playback,smooth and clear picture".
• Wireless Video Transmitters and Receivers work with most HDMI-equipped devices,including DVDs,DVRs,IPTV,CCTV Blu-ray players,set-top boxes,cable/satellite boxes and computer systems,game consoles,and more/connected HDTVs,projectors,monitors,etc.
• 5.8G wireless transmission with dual antenna design improves the quality and reliability of wireless HDMI signals.
• Video/Audio Transmission Through Walls

With the increase of RX, the wireless transmission distance will be shortened.(line of sight distance,unobstructed)

1 TX to 1 RX transmission distance: 250m;1TX to 2 RX transmission distance: 230m;

1 TX to 3 RX transmission distance: 210m;1 TX to 4 RX transmission distance: 190m;

UP TO 4 PAIRS and 1 TX TO 4RX

1. Connect up to four pairs simultaneously without interference.

2. This wireless hdmi extender can support 1 TX to 4RXs (Max),you can add more RXs according to the quatity you need.

Noted: Users need to pair themselves as needed (as picture) to allow multiple expander RXs to be used.If more RXs are needed,you can search for the

B09XQRCDQK to purchase,which allows up to 1 TX and 4 RXs connections.

Audio Separation

The AMS interface on the TX is used to collect external audio,and the sound is transmitted through the TX to the RX for play the collected sound.

Installation Steps

• 1.First connect the HDMI cable, the signal source connect Sender (transmitter) IN input;local display device connect Sender(transmitter) OUT output.
• 2.Then connect the receiver to a remote display device (such as a television, a splicing screen and so on).
• 3.IR remote control function: pay attention to the infrared head of the sender should face and close to the signal source.

Supports vivid,high-definition videos up to 1080p @60Hz. Compatible with HDMI 1.3(High-bandwidth Digital Content Protection) and Loop out 1080P full HD signal to the local monitor.

Note:

• This HDMI wireless extender can transmit 1080P video,but not 4K.
• Transmission distance will vary depending on the environment.Walls,bricks or glass may shorten the signal coverage or cause obvious signal loss.
• Multiple Wireless HDMI Extender Kits operating within close proximity of eachother can cause signal interference
• At present, if your HDMI OUT port of your signal source carries ARC,then this product can only transmit video,but cannot transmit audio.
• Do not install multiple kits in the same location as this may cause signal interference. There will be a delay if an obstacle is encountered.

Resolution supported: 1080p@50Hz /1080p@60Hz/ 1080p@24Hz / 1080p@25Hz / 1080p@30Hz / 720p@50Hz / 720p@60Hz / 576i@50Hz / 480p@60Hz