It own switch terminal which can work with alarm siren or horn directly. Switching voltage and current: <250V 2A, Max.500W.
Dual Action Pull Station w/Key Lock, PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated.
Aesthetically pleasing, highly visible design and color.
For Standalone Alarm, 9V DC or 12V DC or 24V DC power source. Connect power anode to Loop +,Connect power cathode to Loop -. Another Loop + connect + at siren backside. Switch terminal of black wire connect to - at siren backside.
Note: Non UL Listed.What do you get: 1x Call Point Station, 2x Keys
Product Specifications
Manufacturer: Tokatuker
Part Number: SSBB116
Item Weight: 9.1 ounces
Product Dimensions: 5.5 x 4.4 x 1.8 inches
Item model number: SSBB116
Batteries Included?: No
Batteries Required?: No
Installation Type: Screw-In
Voltage: 2.5E+2 Volts
Control Method: Remote
Included Components: Switch
Unit Count: 1.0 Count
Product Information
Product description
How to use?
How to use?
1. Use as a standalone alarm system.
Connect the call point to alarm siren and power source. 9V 12V or 24V DC Power Positive connect to LOOP + of call point, Power Negative connect to LOOP - of call point, Another LOOP + connect to + at siren, Swith terminal with black wire connect to - at siren. Push in and then pull down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag, the siren will sound.
2. Use with conventional panel.
The fire alarm control panel Zone wire can be connected to terminal loop(+), loop(-) unpolarized wire. If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop(+), loop(-)
Technical Parameter:
Dimension: 140mmX105mm
Height: 45 mm
Weight: 220 g
Operating Temperature Range: -10°C to 50°C
Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing
Latching Alarm: Reset by momentary power interruption