Bike Trainer Thru Axle Adapter 12MM Axle 1.0/1.5/1.75 Thread Pitch Multiple Length

ODIER Bike trainer thru axle adapter

Indoor Bike Trainer 12mm Thru Axle Adapter 1.0/1.5/1.75 Thread Pitch 167mm to 185mm Length

How can I know if the ODIER bike trainer thru axle adapter will work with my bike and my bike trainer?

Here's how:

STEP 1: Measure the shaft length of your original axle.

STEP 2: Check which kind of thread pitch your original axle use, 1.0/1.5/1.75

STEP 3: Check if we have a suitable axle with the right thread pitch and shaft length for your bike.

(For example: if your stock axle shaft length is 167mm, the thread pitch is 1.0, then our M12-167-1.0 product will fit with your bike. Each axle included some spacers which allows you to shorten the shaft length 9mm at most, so if your bike’s original axle is 159mm, the 167mm axle from us will also work for your bike with no problem.)

STEP 4: Check if the axle you chosen from us will fit with your bike trainer.

The bike trainer thru axle’s full length should shorter than the bike trainer’s max loading width.

For example: If your bike trainer’s max loading width id 195mm, the 167-1.0 axle’s full length is 191mm, then you can buy the M12 167-1.0 axle with confidence, it will work well on your bike and compatible with your trainer. But! If your bike trainer’s max loading width is 190 or 185mm, then the 167-1.0 thru axle adapter’s full length will exceed the trainer’s loading capacity, it will not compatible with your bike trainer.

How to measure the shaft length:

Shaft length measure should not include the axle head. The length of all the 12mm rod part is the shaft length. (Your stocked axle may marked the shaft length at axle body. )

How to measure the thread pitch with a mm ruler:

Align the first thread teeth to 0, if the No.11 teeth right align to the 10mm, it’s a 1.0 thread pitch. Align the first thread teeth to 0, if the No.8 teeth right between the 10mm and 11mm, it’s a 1.5 thread pitch. Align the first thread teeth to 0, if the No.7 teeth right between the 10mm and 11mm, it’s a 1.75 thread pitch.