Anker SOLIX C1000 Portable Power Station, 1800W (Peak 2400W) Solar Generator, Full Charge in 58 Min, 1056wh LiFePO4 Battery for Home Backup, Power Outages, and Outdoor Camping (Optional Solar Panel)

How do I use a solar charger to charge Anker SOLIX C1000?

- Use an 11-60V solar charger with an XT-60 connector.

- For 11-32V, the supported current is 10A max.

- For 32-60V, the supported current is 12.5A max.

- For best compatibility, use these Anker solar panel series: PS100, PS200, or PS400.

How long can the C1000 power a device?

The C1000 has a capacity of 1056Wh. When powering devices via AC output, the inverter causes some energy loss. For heavy loads, the runtime can be estimated using the formula: 1056Wh x 0.9 (conversion efficiency) / device power consumption = runtime.

What is the output power of Anker SOLIX C1000?

The C1000 has a maximum rated power of 1800W. For devices with surge power, such as water pumps, ensure their surge power does not exceed 1800W during startup.

Can I charge the C1000 with both AC and DC inputs simultaneously?

No, AC and DC inputs cannot be used at the same time. If both are connected, AC input takes priority. It will switch to DC charging when AC is not in use.

How do I activate SurgePad on Anker SOLIX C1000？

SurgePad activates when total output exceeds rate output.

Heat-generating devices work best. SurgePad does not support precision instruments and other devices with voltage protection or a strict voltage requirement.