EN760 SSD with Heatsink 2TB PCIe Gen4, NVMe M.2 2280, 3D NAND TLC, Up to 4800MB/s, Internal Solid State Drive, Dynamic SLC Cache, Compatible with PS5 and PC

Widely Compatible M.2 SSD

This PCIe 4.0 NVMe SSD comes in a compact M.2 2280 form factor, which facilitates efficient and powerful systems.

Compatible with PS5, laptops, desktops and all-in-ones.

The EN760 Internal SSD's thermal control, high-performance bandwidth, and sustainability meet the needs of running large-scale applications, making it ideal for gamers, technicians, and designers.

Notice:

1) Since some of the listed capacity is for formatting and not available for data storage, the actual available memory capacity may be less than the total listed storage capacity.

Factory default setting is 1GB=1,000,000,000 Bytes

Displayed in PC as 1,000,000,000 Bytes/1024/1024/1024=0.93GB

Example-512GB SSD:

Factory capacity: 512x1000x1000x1000=512,000,000,000B=512GB

Actual capacity: 512,000,000,000B/1024/1024/1024=512GB x 0.93=476GB

2) Newly purchased SSD is blank, so you will need to format them in Disk Management before you can use them. Initial formatting involves locating the volume and creating partitions in Disk Management. After performing the formatting process, our computer will be able to recognize and use it.

3) Ediloca is committed to providing comprehensive storage application solutions to global customers.If you have any questions about this NVMe SSD, you can notify us at any time.

INSTALLATION STEPS

NOTE: Please choose 1 thick and 1 thin from the 4 thermal pads that come with the product.

1) Tear off the plastic film on one of the thermal pads, and place it on the heat sink base;

2) Place the SSD on the thermal pad (note that the chip needs to be placed upwards);

3) Adjust the SSD to a proper position so that the screw holes and the M.2 interface leak out;

4) Tear off the plastic film of the other thermal pad, and stick it on the bottom of the heat sink;

5) Insert one side of the heat sink into the slot of the base. After adjusting the position, press the other side of the heat sink firmly, and when you hear a "click", it means that the heat sink is installed in place;

6) Fix the SSD with the heat sink installed with screws or the buckles that come with the motherboard.