TOTO SW4736AT40#01 WASHLET+ Electronic Bidet Toilet Seat, Elongated, Cotton White

Auto Open/Close Seat & Lid

• The lid automatically opens upon your approach and closes as you depart
• Provides an exceptional level of luxury and more hygienic bathroom environment

EWATER+ Cleaning

• Helps keep your toilet fresh by cleaning the bowl and reducing waste after every use
• Creates peace of mind by cleaning the inside and outside of the wand before and after every use

Instant Warm Water

• Instantaneous water heating provides immediate comfort and lasts as long as you need it
• The absence of water heating tank creates a minimalist, streamlined design

Air Dryer & Deodorizer

• Enjoy the ease and comfort of drying with the temperature-adjustable warm-air dryer
• The automatic air deodorizer neutralizes bathroom odors by using powerful filters

Easy, do-it-yourself installation!

• Step 1 - Remove your current seat.
• Step 2 - Install the WASHLET base plate. The rubber grommets can be lubricated with water if needed. Tighten the screws completely.
• Step 3 - Slide the WASHLET onto the base plate. Check the fit on your toilet and readjust the base plate as needed. A quick release button on the right-hand side allows for easy removal.
• Step 4 - Connect the tee connector to your fill valve inlet. Connect the WASHLET hose and reconnect the water supply hose.

Fits Most North American Toilets

• The WASHLET fits most toilets that feature a standard design.
• Check the dimensions of your toilet to ensure proper fit and installation.
• French curves may inhibit proper installation of the WASHLET. Check to ensure adequate space across the width of the tank.
• Be sure that you are able to access the tank's fill valve inlet in order to complete the water connection. Extenders are available if space is limited.

Included and Required Items

• Included Items - WASHLET, base plate and installation hardware, tee connector, and remote
• 120V GFCI outlet required. Rated 15 Amps. Surge protection recommended to protect your WASHLET.
• The 3.9 foot three-prong power cord originates on the back left-hand side of the WASHLET when facing the toilet.
• Meets or exceeds electrical and mechanical standards for the US and Canada. IAPMO EGS and cUPC listed.

Other Considerations

• Some toilet designs, such as fully skirted bowls, restrict access to the fill valve inlet. Limited space can prevent completion of the water connection.
• Check to ensure there is adequate space under your tank to install the tee connector and complete the water connection.
• Extenders are available if your fill valve inlet is difficult to reach.
• Additional fittings required for wall-hung toilet installations.