Pneumatic Metal Dot Peen Marking Machine Metal Maker Pneumatic Marking Machine with Powerful Electromagnetic Base 150x80mm(5.9x3.15inch) Pneumatic Portable Marking Machine for Serial Numbers VIN

Powerful Electromanetic Pneumatic Metal Marking Machine with Digital Control Engraving Machine for Serial Number,VIN,Date,and other Marks.

Advantages

• Powerful Electromagnetic Base for Strong Workpiece Adsorption.
• High Efficiency.Electromagnetic Base Holds Workpiece, No Manual Clamping Needed.
• Upgraded High-Torque Motor and Precision Linear Guide For Accurate Marking.
• High Hardness-Marking Area: 150*80mm.M45*6mm Double Angle Marking Needle.Can Mark Materials Up to Hrc65 Hardness.
• Marking Depth Up To 1mm,5 Times Deeper Than Ordinary Markers.Clear Marking.
• Simple 7-Inch Touch Screen Control.Connect Air Source to Operate, No Pc Required.
• Heat-Resistant.Stable Performance at 40°C
• Durable.Fully Enclosed Display for Dust Protection.Long Service Life With Low Maintenance,Put Through Strict Quality Controls.
• Automated Marking of Characters, Serial Numbers, Vin, Dates, Graphics, Etc.
• Visually Adjust the Air Flow to Adjust the Depth and Thickness of the Marking Content.
• No processing direction restrictions,360° can be marked on Plane or Curved surfaces.

NOTE:The pneumatic marking machine requires connection to a compressed air source to operate.

Case

• M45*6mm,Double Angle Marking Needle.
• Hard Alloy Material,Larger,Bolder and More Durable.
• Marking Depth Up To 1mm,5 Times the Depth of Ordinary Marking Still Clear After Painting,Galvanizing and Shot Blasting.

Q&A

Q1. What is the service life of pneumatic marking needles?

A: Marking Needles Normal marking on iron requires eight hours a day for about 3 months. If it is painted on aluminum, it will take longer.

The life of the marking needle mainly depends on the hardness of the object being marked, as well as the marking depth.

Q2:How to maintain the pneumatic marking machine recommended?

A:You need to replace the worn marking needle, lubricate the linear guide in the marking machine every week according to the frequency of use.

Q3: What formats does the machine support conversion to?

A:The machine supports keyboard, scanner input, and U disk import of SLG format files,CAD files can be converted into SLG format, and the equipment can automatically print serial numbers.

Q4. What size air compressor is recommended for pneumatic marking machines? Are there any special requirements?

A:Meet 0.4~0.5Mpa, the air output is not less than the air consumption, the compressed air is dry, and the electromagnet can be firmly sucked.

Q5：Does the pneumatic marking machine allow input using a scanner plugged into one of the USB ports?

Yes, click on the input box to scan, which is equivalent to keyboard input. The scanned content can directly generate a marking file.You can also connect a keyboard or connect a barcode scanner to rotate text upside down.

Q6. What is the marking range?

A:Maximum length and width of bottom surface of model 15080 models 352*195mm(13.86*76.77inch)