HDMI Video Wall Controller 2X2,4K x 2K HD Display,180 Degree Rotate, 8 Splicing Modes 2x2,1x2,1x3,1x4,2x1,3x1,4x1, Input 4K and Output 1080P, Streaming Media Video Device

Stream all you want to a big screen, without any delay, support all APPs you know and love. :)

Enjoy the vivid world!

Our 2x2 tv wall controller , support 1-way HDMI input and 4 HDMI output.

The main function is to divide a complete HDMI,HD image signal into 4 blocks and assign to 4 video display unit (such as projector unit, LCD TV, etc.). Complete with 4 HDMI high-definition video display units to form a large dynamic image screen.

8 splicing modes, just a click to switch via IR Remote Controller or panel button "MODE", so easy!

Installations:

1.Connect hdmi source to hdmi input with HDMI cable,connect hdmi output to TVs.

2.Connect 12V power adapter.

3.Set up splicing mode by the MODE button on the unit or remote controller.

Warm tips:

when you use the 1X2 mode,pls make sure the output ports are "output 1 and output 2"

when you use the 1X3 mode,pls make sure the output ports are "output 1 ,output 2 and output 3" and so on!

2 Ways to switch modes:

1). IR Remote Controller to switch

2). Click panel button "MODE" to switch

Input resolution requirements in different modes:

For the 1x1 and 2X2 splicing mode, it is recommended to use a resolution of 1920X1080 or 3840X2160.

For the 1X2, 1X3, and 1X4 splicing modes, it is recommended to use a resolution of 3840x1080

For the 2X1 splicing mode, it is recommended to use a resolution of 1920x2160.

For the 3X1, and 4X1 splicing modes, it is recommended to use a resolution of 1920x3240(Slightly compressed image quality).

If you need to rotate your TV 90 degrees for horizontal tiles:

For the 1x2 splicing mode, it is recommended to use a resolution of 2160x1920

For the 1X3 and 1X4 splicing modes, it is recommended to use a resolution of 2160x1920(There is slight image stretching, but it barely impacts the viewing experience.)

For the 2x2 portrait splicing mode, it is recommended to use a resolution of 1080x1920 or 2160x 3840

HOW to operate 180°rotation:

First, you need to install the top two TVs upside down, and then use the remote control to complete the following operations:

First press the "180°" key, and after an interval of 1 second, press the numeric key "1". After an interval of 1 second, press the "OK" button to confirm.

Note:

1. All output ports support 180-degree rotation for flexible cable management.

2. To enable accurate image display, please connect the four TVs from left to right and top to bottom to the controller's OUTPUT1-4 ports respectively.

3. Item itself not support 90 degree rotation.

Package includes:

(1).1 * 2X2 tv wall controller

(2).1 * 12V 1A Power adapter

(3).1 * User Manual

(4).1 * IR Remote Controller

(5).1 * Type-C to HDMI cable (length: 2m)

Warm tips:

1.Supported audio format PCM 2.0,not support Dolby Digital and DTS.

2.Input Distance: No more than 5m/16.4ft; Output Distance: No more than 10m/32.8ft.

3.Remote Control Battery: 2 x AAA Batteries (not included).