16 inch Impulse Heat Sealer Manual Bags Sealer Heat Sealing Machine Poly Bag Heat Sealer Sealing Machine for Plastic Bags PE PP Bags with Extra Replace Element Grip

✅Specification: Voltage: 110 V / 60 hz and Heat Time: 2-3.5 Set.

✅Sealing length: 7.75 inch (200mm),11.75 inch (300mm),15.75 inch(400mm).

✅Sealing Width: 0.3mm.

✅Impulse power: 180-220W for 8 inch,270-310W for 12 inch,400-450W for 16 inch.

✅Package Contents: Impulse heat sealer +1 Extra sealing elements + Instruction manual.

1.) Level 3-4.5 is enough for most applications.

2.)The red light is not predictable when plug into the power. It is only predictable when keep the handle pressed down on bottom. This is a protection for sealer.

3.)When the signal light is off automatically, keeping the handle pressed down for 2-3.5 seconds would get optimal results.Otherwise the sealing place will be not smooth.

4.)Keep the sealer's surface clean to avoid the oxidation of the residue which will reduce the life of the heat sealing strip.

✅TIPS:

1.Kindly pls reading Instruction manual carefully and To adjust the temperature that you need when using it for the first time.

2.Higher settings don't necessarily always mean a stronger seal.We recommend starting low and gradually increasing your settings from 2.5-4.5 temperature grade for the different thick bags,it's better don't exceed 5 Grade temperature.

3.Do not use wet cloth to clean the surface of heat sealing strip,after 30 minutes of continuous use, try to let the machine rest about 5-10 minutes.

4.The sealing machine cannot be placed in where blankets, clothes, etc. That cannot dissipate heat. It is recommended to place it on the table top.

5.When using this machine in the summer, we recommend that the temperature be lowered by one level than in winter and keep an eye on the temperature of the bottom cover.

6.It's better for sealing the PP,PE bags,but can't cut the bags.