Features:
Material: ABS Plastic & 3M tape pad
Size: 0.8"L X 0.6"W X 0.4"H
Applicable cable diameter: 0 - 5 mm (0 - 0.2 inch) . You can cut the connecting section in the middle of the clips and get more space.
Those wall wire clips are not only for cord management/cord hider, but also help you decorate your Halloween, Thanksgiving, Christmas lights, birthday party easily. If you want to hang something overweight, you can add 2-3 nail clips in the corner.
STEPS:
Please attach to a smooth clean surface.
Remove the backing paper and press firmly for 30 seconds.
Do not remove and try to reapply the wire wall clips.
Please allow 24 hours for maximum adhesion.
Tips for Better Use:
Do not use these wire clips for electric wires on the surface which is wet, textured, dirt or with oil and wax etc.
Please clean the mounting surface with alcohol pads before you use.
Please use the adhesive cord clips for wall 24 hours later to allow the glue adhesive better.
When remove the wire holders from the painted wall, it is better to use a hair dryer to heat the backing tape several seconds to avoid pulling off the paint.
The wire to be fixed should be less than or equal to the inner diameter of the buckle to reduce the external force on the buckle and increase the service time.