Question 1: Each time the light bulb is installed, it can be lit, and after being extinguished, the light bulb can no longer trigger the infrared induction function and cannot be lit?
Answer: It is likely that there are other light sources around the light bulb, and the surrounding environment is bright, resulting in the light sensing device inside the light bulb to be activated, so it cannot trigger the light bulb to light up, you can test the function of the light bulb in a dark environment.
Question 2: Why can't the infrared sensing function of the bulb be triggered?
Answer: Excluding the above reasons, we recommend that when installing the light bulb, the top infrared sensor of the light bulb should be oriented towards the orientation of the sensor, the sensor has an induction range of 120°, and there can be no obstacles to block the sensor, because the penetration of the infrared sensor is very poor (such as glass lamp shade, plastic lamp shade, cloth strip, etc.). If the Angle of the lamp is not easy to adjust you can install a converter cap(Search for ASIN "B07RB456QH") to solve the Angle problem.
Question 3: Why is the light bulb insensitive or constantly activated innocently?
Answer: To rule out the reasons for the above problems, 1. we need to pay attention to the height of the installed bulb (no more than 10ft), 2: Infrared induction light bulb is controlled by using the thermal infrared radiation generated by the human body. When the temperature around the human body is close to that of the human body or other electronic devices emit similar thermal infrared radiation around the human body, the induction light bulb will not be able to distinguish the phenomenon of induction is not timely or constantly flashing. Finally, if we encounter any lamp problem, Please contact Aukora, we will do our best to solve the problem for you, when you test the bulbs function, be sure to do it in the dark environment.