BLUETTI AC200P Solar Generator with Panels Included 2000W Portable Power Station with 3pcs Foldable Solar Panel 120W SP120, Solar Power Generator for Van House Outdoor Camping

About BLUETTI

With over 10 years background of energy industry,BLUETTI is committed to provide premium all-in-one sustainable power solutions for all kinds of off-grid life.

BLUETTI AC200P Portable Power Station

• Capacity: 2000Wh/2000W,LiFePo4,3500+ cycle life
• AC Load:Continuous 2000W(2000W<load<2500w@2mins,surge 4800W)
• Solar Input: Max.700W, OCV 35-150V,Current Max.12A, MPPT
• PV+ AC(1100W Max.,2.5-3Hrs) recharging simultaneously
• Support Dual AC adapter(Total 800W) fast recharge

BLUETTI SP120W Foldable Solar Panel

• Monocrystalline silicon cells, ETFE, scratch-proof, and easy to clean
• Cell efficiency:23%, working voltage: 19.8v, OCV:23.7V,short circuit current:6.66A
• Portable & Compact: 16in*16.8in(Folded), Weight:9.48lbs

Package Included:

• 1*BLUETTI AC200P solar power station (2000Wh/2000W,) ,1*AC Adapter Charger,1*Solar Charging Cable(XT90 to solar charging cable), 1*Car Charging Cable(Car to XT90),1* XT90 to Aviation Plug(input),
• 3 Pcs 120W foldable solar panels(BLUETTI SP120) ， 2*User Manual.

Connect AC200P with SP120 solar panel in Series（Pls make sure the solar panels connected in series and there is no shadow on the solar panel !）

We recommend You can connect 3-5pcs SP120 120W solar panel in series as shown in the picture above.

Tips:

• we include the solar charging cable(MC*4 to XT90), you can connect solar panel with BLUETTI AC200P portable power station via the solar charging cable.
• We built in MPPT controller in the AC200P power station, no need other extra accessories such as MPPT controller.

Recharge Time:

3 Pcs SP120 Recharge AC200P fully: About 7-10Hrs

4Pcs SP120 Recharge AC200P fully: About 6-8Hrs

5Pcs SP120 Recharge AC200P fully: About 5-6.5Hrs

Note:

• Pls through the display screen to set DC input source to “PV mode”,turn off "car Mode" while charging AC200P via solar panels !!!!
• The above result is a theoretical value which is calculated based on connecting the solar panels in series and tested under full sun.
• The recharge time may varies from the total actual input solar power, the weather condition, the angle and the location /the altitude you place the solar panel.

FAQ:

Q1: How to choose the solar panel & what is the recharge time?

A: we recommend to choose solar panel that meets below:

1) open circuit voltage between 35-150v(OCV, whatever you connect the panel in series or in parallel), Max.700W, Max.12A

2) MC*4 Connector (if your solar panel has an anderson connector, you need to buy a anderson to mc*4 charging cable)

Note:total OCV below 35V or above 150V will trigger low-voltage/over-voltage protection. AC200P only receive 700W/12A(Max.) if total input power /current exceed 700W/12A.

The recharge time various from diffrent factors such as weather condition, the actual input solar power, temperature, angle, etc.

Q2: How many solar panels can i connect to the BLUETTI AC200P?

A: we suggest to chain at least 3pcs SP120 120W solar panel in series, and 5pcs at the most.

for professional solar user, you can connect SP120 4S2P(total 8pcs) to reach the max.700W. (the parallel cable need to buy separately)

Tips: Single BLUETTI SP120 or SP200 will not charge AC200P, We recommend at least 3 pcs BLUETTI SP120(120W solar panel) or BLUETTI SP200(200W solar panel) in series to charge AC200P！！！！！

Q3: How do we ship this bundle?

A：Due to the large size of AC200P Power Station & SP120 Solar Panels, we will ship these two products separately!!!!!!!!