Machine Setting and Instruction

• Stitch: Straight stitch Needle position: Center Stitch width: Pre-set

1. There are two grooves on the underside of the foot that guide the coil of the zipper as you stitch.
2. The invisible zipper is inserted in an open unsewn seam.
3. Open the zipper and place the right side of the zipper to the right side of the fabric, placing the coil of the zipper on the seam line
4. To sew the right side of the zipper: Raise the coil and position the coil in the right groove so the center needle position will sew to the left of the coil.
5. To sew the left side of the zipper: Raise the coil and position the coil in the left groove so the center needle position will sew to the right of the coil.
6. Stitch from the top of the zipper tape to the zipper pull on both sides.
7. Close the zipper
8. Finish the seam under the zipper by moving the bottom of the zipper out of the way and match the fabric edges. Stitch the seam